Things to note when driving a loader in winter

Winter is not very kind to many construction machines. There are many things to pay attention to when driving a loader in winter, and carelessness may affect the use of the loader. Then, what should you pay attention to when driving a loader in winter? Let us share it with you.

Things to note when driving a loader in winter

1. Using a vehicle in winter is relatively difficult. It is recommended that each start should take no more than 8 seconds. If it cannot start, you must release the start switch and wait for 1 minute after stopping the second start. After the engine is started, idle for a period of time (the time should not be too long, otherwise carbon deposits will form on the inner wall of the cylinder and the cylinder will pull). Charge the battery once and secondly until the water temperature reaches 55°C and the air pressure is 0.4Mpa. Then start driving.

2. Generally, the temperature is lower than 5℃. Before starting the engine, water or steam should be heated for preheating. It should be preheated to above 30~40℃ (mainly to preheat the cylinder temperature, and then heat the mist diesel temperature, because General diesel engines are compression ignition type).

3. When the water temperature of the diesel engine is higher than 55°C, the engine oil is only allowed to operate at full load when the temperature is higher than 45°C; the engine water temperature and oil temperature should not exceed 95°C, and the oil temperature of the torque converter should not exceed 110°C.

4. When the temperature is below 0℃, the water tank sewage chamber of the engine, oil cooler and the cooling water in the torque converter oil cooler is released every day after work. In order to avoid freezing and cracking; there is water vapor in the gas storage tank, and it must be discharged frequently to prevent freezing. Cause Braking failed. If antifreeze is added, it cannot be released.

The above are the precautions for driving loaders in winter that we have introduced to you. We hope that it can help everyone improve their driving level. In this way, the good suitability of the vehicle can be more comprehensively guaranteed. If your loader needs replacement spare parts during use, you can contact us or browse our spare parts website directly. If you want to buy a second-hand loader, you can also consult us directly, and CCMIE will serve you wholeheartedly.


Post time: Apr-23-2024