0445110690 Injector Assembly for Foton 4JB1 2.8L-C Diesel Engine

0445110690 Injector Assembly for Foton 4JB1 2.8L-C Diesel Engine Featured Image
  • 0445110690 Injector Assembly for Foton 4JB1 2.8L-C Diesel Engine

Short Description:

0445110677 common rail fuel injector assembly is an SG04 high-precision fuel injection unit customized for Yunnei KM series 1.65L,1.9L and 2.5L Euro 4 diesel engines.

Product Detail

Product Tags

description

0445110690 serves as the core common rail injection component for Foton 4JB1 2.8L-C diesel engines. During daily delivery operations, long-term high-pressure fuel scouring, dynamic load changes and road vibration will gradually produce micro abrasion on nozzle holes and fatigue damage to internal valve assemblies. This reduces injection accuracy, worsens combustion efficiency and causes continuous power attenuation. Optimized under SG04 light-duty commercial vehicle standards, this injector adopts high-stiffness wear-resistant alloy steel plus reinforced anti-fatigue valve set. Its precision-machined nozzle generates fine, evenly distributed fuel mist to support sufficient combustion inside cylinders. Improved control valve optimizes injection timing and fuel metering accuracy, lowering risks of internal leakage and pressure loss. Reinforced internal structure withstands cyclic high-pressure impact. Each finished injector undergoes strict high-pressure cycle testing, atomization inspection and dimension calibration for direct swap of aged injectors.

product parameters

  • Model Number: 0445110690
  • Product Type: Complete common rail diesel fuel injector assembly
  • Applicable Engine: Foton 4JB1 2.8L-C Diesel Engine
  • Applicable Equipment: Foton light trucks, cargo vans, urban medium & short-distance delivery vehicles
  • Rated Working Pressure: 1600 bar
  • Working Temperature: -40℃ ~ +120℃
  • Material: High-stiffness wear-resistant alloy steel, anti-aging high-performance sealing compound
  • Included Parts: Precision nozzle core, control valve assembly, full set of sealing fittings
  • Manufacturing Standard: SG04 upgraded OEM micron-level tolerance standard
  • Supply Status: Complete assembly, ready for direct installation
  • Installation Method: Original position direct replacement
  • Working Condition: Urban & suburban roads, frequent start-stop, medium-light load delivery tasks
  • Core Function: Restore engine torque, stabilize idle speed, optimize fuel atomization, reduce exhaust smoke and cut fuel consumption

advantage

  • SG04 OEM Grade Matching: Produced following SG04 micron-level OEM specifications, perfectly matches Foton 4JB1 2.8L-C engine parameters, plug-and-play without cutting or modification.
  • Light-Duty Delivery Vehicle Calibration: Tuned for frequent start-stop and variable-load delivery scenarios of Foton light trucks, maintaining stable atomization and precise fuel supply under complex road conditions.
  • Integrated Assembly Cuts Vehicle Downtime: One-piece injector replacement shortens repair hours, reduces vehicle out-of-service time and fleet maintenance expenditure.
  • Complete Supporting Accessory Kit: Equipped with core wearing components and anti-aging sealing parts, suitable for routine maintenance and full engine overhaul projects.
  • Multi-Stage Rigorous Factory Validation: High-pressure cycle, atomization consistency and fatigue durability tests guarantee stable batch quality performance.
  • Fuel-Erosion Resistant Anti-Aging Formula: Optimized alloy and composite sealing material resist fuel corrosion and pressure fluctuation, extending injector service cycle.

FAQ

  • Q1: What typical faults can this injector solve?
  • A: It repairs a series of performance defects caused by injector aging, including insufficient engine torque, fluctuating idle, black exhaust smoke, difficult cold startup under low temperature, delayed throttle response and excessive fuel consumption.
  • Q2: What engine and equipment does 0445110690 fit?
  • A: Specially designed for Foton 4JB1 2.8L-C diesel engine, widely fitted on Foton light trucks, cargo vans and urban medium & short-distance delivery vehicles.
  • Q3: Is coding required after installation?
  • A: Most standard machines support direct replacement; certain ECU systems need injector coding input to achieve optimal combustion state.

warehouse

We have built four spare parts warehouses in Xuzhou, Jining, Kunshan and Changsha to provide customers from all over the world with a variety of high-quality spare parts. We can basically ship self-provided spare parts within three days after confirming the order. If the spare parts need to be adjusted or processed, they will be shipped within 7-30 days.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories