112-9965 152.55 mm rear crankshaft seal CAT spare part

Short Description:

319-7401 Cat camshaft seal assembly, fitted on camshaft end, dynamically prevents engine oil leakage and blocks dust and mud from entering timing chamber.


Product Detail

Product Tags

description

This is an integrated rear crankshaft oil seal with wear sleeve for Caterpillar. It includes carbon steel carrier, EPDM rubber sealing lip and built-in wear sleeve. No separate sleeve is required. It fits between crankshaft rear end and flywheel housing. The lip creates dynamic sealing while crankshaft rotates, stops oil leaking into flywheel compartment and blocks mud, sand and water from construction and mining sites. It is used for engine overhaul and rear-end oil leak repair.

Part Number:112-9965
Name:Rear Crankshaft Seal
Outer Diameter:152.55 mm
Structure:Cassette seal with integrated wear sleeve, carbon steel carrier and garter spring
Material:Ethylene propylene diene terpolymer (EPDM) Rubber, Carbon Steel, Plastic Plastic
Mounting Position:Crankshaft rear, inner side of flywheel housing

Advantages

• Helps absorb vibrations and stress generated during movement
• Offers a high degree of flexibility and durability

1. EPDM rubber has good aging, water and oil resistance, resists cracking under variable working conditions.
2. Integrated wear sleeve included. Replace the whole assembly for worn journal, no extra sleeve installation needed.
3. Pre-assembled from factory for stable concentricity, reduces uneven lip wear and extends service life.
4. OEM standard dimension, ready for direct press-fit into flywheel housing bore.

FAQ 

Q:Do I need an extra wear sleeve for this seal?
A:No, wear sleeve is integrated into the assembly, replace the whole unit.

Q:Can EPDM seal replace FKM seal?
A:Not recommended. They differ in temperature and oil resistance, premature failure may occur.

Q:Can sealant be applied on sealing lip?
A:No sealant on lip. Only thin sealant on outer shell. Sealant on lip causes leakage.

Q:Can regular rear seal with same OD replace this sleeve-type seal?
A:No. Internal sleeve structure differs, wrong fit leads to uneven wear and leak.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us