129-6313 alloy steel CAT spare part

Short Description:

129-2288 CAT pivot pin, 69.8 mm diameter, hinge pin for construction machinery, serves as rotary pivot for boom, link and bucket, bears heavy digging and lifting load, controls hinge clearance and ensures smooth swing of working equipment.


Product Detail

Product Tags

description

This CAT drive shaft is integrally forged from high-strength alloy steel. Journals and spline surfaces are precision ground and quenched with tight tolerance. It is installed inside construction machinery transmission housing, receives power from upstream gears and transmits torque to downstream assemblies. It withstands alternating torsion, radial impact and gear oil scouring, stabilizes meshing clearance and reduces runout and uneven wear, lowering power loss. It serves as overhaul replacement part for CAT construction machinery transmission system.

Part number: 129-6313
Brand: CAT
Type: drive shaft
Material: alloy steel
Processing: one-piece forging, involute spline machining, journal precision grinding, surface quenching, anti-rust and wear-resistant treatment
Matching parts: drive gear, bearing, oil seal, retaining ring, locating key

Advantages:

1. Hardened splines and journals, torsion and wear resistant, anti-slipping and anti-scoring under long heavy load
2. High shaft concentricity with low runout, reduces abnormal transmission noise and oil seal leakage risk
3. Good material toughness, resistant to alternating impact load and hard to twist or fracture
4. OEM specification, direct replacement and high compatibility with original gears and bearings

FAQ 

Q: What faults will be caused by worn or damaged drive shaft splines?
A: Unstable power transfer, weak travel, abnormal drive noise, spline slipping, power cut-off and broken gears in severe cases.

Q: Can this drive shaft be purchased separately?
A: It is an individual spare part available for separate purchase.

Q: Is it recommended to replace oil seal together?
A: Replacement is recommended. Aged old seals are prone to leakage after reassembly.

Q: Where does wear mainly occur?
A: Drive spline section, journals mating with bearings and oil seals.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us