190-3968 106.9mm fan pulley shaft CAT spare part

Short Description:

642-6392 Cat pump drive input shaft with 14 teeth, fitted inside pump drive assembly, receives engine power and drives hydraulic pump and auxiliary pump to supply stable hydraulic power.


Product Detail

Product Tags

description

This fan pulley shaft is built for Caterpillar cooling fan drive assembly. It is forged high-strength steel with precision machining. The flange has ten threaded mounting holes. It serves as the rotary spindle for fan drive. Belt power transfers through this shaft to spin the cooling fan. It withstands belt tension and cyclic torsion load. It is widely used on excavators, mining trucks and motor graders. It is replacement part for fan drive overhaul and repair of worn shaft or failed bearings.

Part Number:190-3968
Name:Fan Pulley Shaft
Shaft Diameter:106.9 mm
Material Description: Steel
Flange Diameter (mm): 106.9
Outer Diameter (mm): 106.9
Total Length (mm): 81.0
Threads: M8X1.25, M6X1
Total Height (mm): 81.0
Diameter (mm): 106.9
Structure:Flange type with 10 threaded mounting holes
Mounting Position:Inside engine fan drive housing

Advantages

1. Forged alloy steel with high rigidity, torsion and fatigue resistant, not easy to bend under heavy vibration.
2. OEM flange hole layout ensures accurate positioning and pulley alignment, reduces belt noise and uneven wear.
3. Precision ground mating surface works smoothly with bearings and seals, lowers oil leakage and binding risk.
4. OEM dimension for direct replacement, keeps original fan speed and cooling performance.

FAQ 

Q:Can fan shaft with slight scoring stay in service?
A:Long-term use is not recommended. Scoring accelerates seal wear, oil leakage and bearing failure.

Q:Should bearing and seal be replaced together with fan shaft?
A:Replace if bearing loose or seal aged, to protect new shaft.

Q:What happens if flange bolts are under-torqued?
A:Flange loosens under vibration, pulley offset, rapid belt wear and engine overheating.

Q:Can fan shafts with similar diameter interchange?
A:No. Flange hole pattern, total length and locating step differ, wrong part cannot fit.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us