195-30-51481 195-30-51491 track adjuster cylinder for Komatsu D375 bulldozer

Short Description:

This is Komatsu track recoil spring assembly for D375A-5/D375A-6 bulldozer, absorbs track impact and overload, replacement for fatigue broken, weak or deformed spring housing.

Product Detail

Product Tags

description

Komatsu left and right track adjuster cylinders are non-interchangeable. They are hydraulic core parts for track tension system, installed between idler bracket and recoil spring housing. Grease pushes piston out to tension track, and retracts when hitting obstacles together with spring to avoid derailment. It fits Komatsu D375A-5, D375A-6 mining dozer for open pit and quarry operation. Thick alloy steel tube, hard chrome plated piston rod and built-in seals block mud. Replace left or right separately when leaking, pressure dropping, scored or stuck.

Product Name: Track Adjuster Cylinder
Part Number: 195-30-51481 (Left), 195-30-51491 (Right)
Material: Thick alloy steel tube + chrome piston rod
Process: Cylinder honing, piston rod quenched, tempered and chrome plated
Accessories: Seal kit and recoil spring assembly sold separately

advantages

1. Side-specific structure, different port and mounting position, non-interchangeable
2. Precisely honed bore, stable pressure holding, less track slack
3. Chrome plated rod, anti-corrosion and wear resistant in muddy mine
4. Large bore design to handle heavy track impact of D375 dozer
5. OEM dimension, single side replacement, no need to change whole adjuster
6. High-demand undercarriage hydraulic part for mining market

maintenance & replacement tips

1. Release internal pressure before disassembly, high spring energy, safety protection required
2. Distinguish left and right part number strictly, they cannot be interchanged
3. Inspect rod surface and spring slide way after removal
4. Install new seal set, add grease and adjust track tension after assembly
5. Test pressure holding, check idler slide if pressure drops quickly

FAQ

Q: Can left and right cylinder be swapped?
A: No, oil port and mounting structure differ. 195-30-51481 for left, 195-30-51491 for right.

Q: Can I just replace seal kit for leaking cylinder?
A: If rod or cylinder bore is scored, new seals fail quickly, assembly replacement is recommended.

Q: Why track becomes loose shortly after greasing?
A: Internal leakage, broken seal, stuck slide or weak recoil spring.

Q: Does this cylinder include recoil spring housing?
A: No, recoil spring assembly is sold separately.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us