200634056 guide block for XCMG RP705 paver spare parts

Short Description:

Bolt, Part No.805006286, Size M20×55, is a high-strength hexagon head bolt for XCMG RP705 medium crawler paver. It is used with M20 nuts and washers to fasten brackets, guards, auger accessories and hinge supports.

Product Detail

Product Tags

description

This guide block is made of wear-resistant alloy or high-performance polymer with precision sliding surface and low friction coefficient. When the screed and auger adjust, the guide block bears lateral force and guides linear movement to prevent metal-to-metal friction. Under repeated sliding, hot asphalt and grit abrasion, the working surface will groove, thin or crack. Worn guide block causes excessive clearance, skewed parts and unstable paving thickness, so replacement is required.

product parameters

Part No.:200634056
Product Name:Guide Block
Material:Wear-resistant alloy / high-performance polymer
Processing:Cutting and precision milling
Working Condition:Reciprocating sliding friction, lateral impact, high temperature and asphalt dust
Function:Guide sliding motion, limit offset and isolate friction pairs

Applicable Scenarios

Used on screed slideway, pull rod slide pair and auger extension mechanism of XCMG RP705 paver. Replace when worn thin, grooved, cracked or with excessive clearance.

advantage

▪ OEM contour and mounting holes for direct fitting
▪ Heat and abrasion resistant for hot asphalt environment
▪ Self-lubricating property reduces sliding resistance and jamming
▪ Good lateral load capacity to keep components aligned
▪ Separate wear part, replace individually to save cost

FAQ

Q:Can slightly worn guide block keep working?
A:Minor wear without play or jamming is acceptable for temporary use. Replace if deep grooves appear.

Q:What clearance should be reserved during installation?
A:Smooth sliding without obvious side play. Excessive clearance leads to offset.

Q:Can I repair the guide block by welding?
A:Polymer type cannot be welded. Alloy type can be hardfaced and machined professionally.

Q:Can guide blocks from different positions be swapped?
A:No. Shape, thickness and hole layout differ. Match by part number.

Q:How to extend service life?
A:Clean asphalt and gravel from slideway regularly, apply grease and avoid hard debris.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us