200635110 Lower cover plate for XCMG RP705 paver spare parts

Short Description:

Right Auger Blade, Part No.209901246, Model AR3628-1, is a right-hand spiral blade for the auger of XCMG RP705 medium crawler paver.

Product Detail

Product Tags

description

This lower cover plate is made of bent steel plate with mounting holes and assembled with sealing gaskets. It seals the bottom opening of the auger housing, prevents asphalt and gravel from entering the housing and jamming the drive parts, and retains lubricating oil to avoid oil loss. Under high temperature, material erosion and continuous vibration, the cover may wear, deform, crack or have torn mounting holes. Failed sealing will lead to oil leakage and material ingress, accelerating wear of internal drive parts. The cover can be removed for cleaning and inspection of bottom chains and bearings.

product parameters

Part No.:200635110
Product Name:Lower Cover Plate
Material:Q235 steel plate
Processing:Bending and punching
Working Condition:Hot asphalt erosion, gravel abrasion and continuous vibration
Function:Seal the bottom opening of auger housing, protect internal sprockets and chains, block asphalt ingress, prevent oil leakage and allow bottom cleaning and maintenance

Applicable Scenarios

Installed on the bottom of auger housing of XCMG RP705 paver, used together with auger housing and upper cover plate. Replace when the cover plate is worn, deformed, cracked or with damaged mounting holes.

advantage

▪ Accurate original holes, perfectly matched with auger housing flange for easy installation
▪ Reliable steel structure, resistant to material erosion and high temperature
▪ Stable sealing with gaskets to prevent oil leakage and material ingress
▪ Easy to disassemble and assemble for cleaning and inspection
▪ Protect chains and sprockets, reduce drive failures and maintenance cost

FAQ

Q:Can a slightly deformed lower cover plate keep working?
A:It can be used temporarily if it compresses the gasket properly without oil or material leakage. Replace it if severely warped.

Q:Is it OK to replace only the gasket if the seal fails?
A:Yes if the cover plate itself is intact, which saves cost.

Q:Can lower cover plates of left and right auger housings be interchanged?
A:Asymmetric covers cannot be swapped. Install strictly according to part number.

Q:How to clean hardened asphalt on the cover?
A:Scrape gently after full cooling. Do not strike hard to avoid deformation and cracking.

Q:How to tighten the bolts of lower cover plate?
A:Tighten diagonally and evenly in several steps to avoid gasket damage and leakage.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us