200635124 Material distribution box for XCMG RP705 paver spare parts

Short Description:

Support Plate, Part No.200635111, is a supporting steel plate for the undercarriage of XCMG RP705 medium crawler paver.

Product Detail

Product Tags

description

This auger housing is fabricated by thick steel plate welding, with pre-machined bores for bearing seats, oil ports, inspection openings and connecting flanges. It houses the auger drive assembly. Asphalt mixture is delivered into the housing area by the conveyor, and the internal drive parts drive the left and right augers to spread material horizontally for uniform paving and reduce segregation. During paving, the housing is exposed to hot asphalt, material abrasion and cyclic load. Long-term operation may lead to weld cracking, worn bearing bores, deformation and gear oil leakage. Damaged housing causes oil loss, chain jamming and auger shutdown, resulting in material shortage and segregation on pavement. It is a major overhaul component.

product parameters

Part No.:200635124
Product Name:Auger Gearbox Housing
Material:Welded Q355 steel plate assembly
Structure:Bearing seat openings, grease ports, inspection covers and connecting flanges
Working Condition:Hot asphalt mixture, continuous material abrasion and drive impact load
Function:Enclose and protect auger drive parts, store lubricating oil, support auger shaft operation, distribute asphalt mixture horizontally and reduce material segregation for uniform paving

Applicable Scenarios

Installed at the distribution section between conveyor and screed of XCMG RP705 paver, serving as the drive housing for the auger system. Replace the whole assembly when cracked, with worn bearing bores or severe oil leakage.

advantage

▪ Original welded assembly with accurate flange and bearing bores for easy alignment
▪ Thick welded steel structure, resistant to material impact and high temperature
▪ Reserved grease ports and inspection covers for convenient maintenance of chains and bearings
▪ Reliable sealing reduces asphalt ingress and protects internal drive parts
▪ Restore auger support and solve jamming and uneven distribution after replacement

FAQ

Q:Can a leaking weld on the auger housing be repaired by welding?
A:Minor leakage without deformation can be welded after cleaning. Replace the whole unit if the housing is twisted or bearing bores are out of round.

Q:Why does asphalt get inside the auger housing?
A:Aged shaft end seals allow asphalt to enter. Oil seals must be replaced together.

Q:Can left and right auger housings be interchanged?
A:Asymmetric housings with different flanges and ports cannot be swapped. Install by part number.

Q:What maintenance is required for the auger housing?
A:Check oil level regularly, clean asphalt deposits at inspection covers and inspect welds and shaft seals.

Q:Is boring and bushing a reliable repair for worn bearing bores?
A:It works for minor wear. Avoid this repair if the housing is deformed, which causes auger shaft runout.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us