200635167 Left hydraulic pipe I for XCMG RP705 paver spare parts

Short Description:

803164717, Flange Assembly, genuine XCMG heavy‑duty hydraulic flange assembly for XCMG RP705 medium crawler asphalt paver.

Product Detail

Product Tags

description

This genuine left hydraulic pipe Ⅰ is bent from precision seamless steel tube with smooth bends without flattening or inner wrinkles. Tube end bevels, welding seats and threaded fittings are matched as a set. Inner bore is thoroughly cleaned by pickling and phosphating to reduce contamination. Outer surface is coated with heavy‑duty construction paint against corrosion from mud, asphalt and stone impact. Its routing, bracket holes and fitting angles follow original host design. No field bending or cutting is required. It directly replaces deformed, rusted, leaking or cracked rigid pipes and stabilizes oil supply for travel circuit, preventing travel drift and power loss caused by pipe failure.

product parameters

Part Number: 200635167
Name: Left Hydraulic Pipe Ⅰ
Type: Seamless steel rigid hydraulic pipe
Material: High‑pressure seamless steel tube
Process: Custom bending, pickling & phosphating, outer painting
Ports: Original matched fittings
Working Fluid: Anti‑wear hydraulic oil for construction machinery
Mounting Position: Left undercarriage travel hydraulic circuit of paver
Applicable Machine: XCMG RP705 medium crawler asphalt paver

Applicable Scenarios

Installed on the left undercarriage of RP705 paver as fixed routing for travel hydraulic circuit, working together with hoses, adapters and flanges for oil transmission. It is commonly replaced during chassis overhaul, machine refurbishment, or when pipes are perforated by rust, dented by impact, leaking at welds or worn by interference.

advantage

• Pre‑bent OEM routing with correct length and fixing points for easy alignment
• High‑pressure seamless steel tube resists bursting under sustained system pressure
• Clean inner surface reduces scale shedding and protects precision components in motors and valves
• Durable paint slows rust and pitting in muddy, asphalt‑rich construction environment
• Matched fittings are supplied together to avoid field welding and bending work
• Every pipe passes pressure test before delivery for higher reliability than site‑fabricated lines

FAQ

Q: Does this left hydraulic pipe Ⅰ fit XCMG RP705 paver?
A: Yes. Part No. 200635167 is genuine XCMG left hydraulic pipe Ⅰ for the left undercarriage travel hydraulic circuit of RP705 medium crawler asphalt paver.

Q: When should rigid hydraulic pipes be replaced?
A: Replace if pitted by rust, dented at bends, leaking at welds, cracked, impacted or thinned by abrasive rubbing.

Q: Can rigid hydraulic pipe be bent on site?
A: Not recommended. Improper bending creates inner wrinkles, restricted bore and stress concentration, leading to premature cracking.

Q: What is the difference between rigid pipe and hydraulic hose?
A: Rigid pipe serves stationary routing with little movement. Flexible hose is used where components shift and vibrate. They work as a matched set.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us