200635169 Drive sprocket for XCMG RP705 paver spare parts

Short Description:

200605133, Screw M16×1.5×70, genuine XCMG high‑strength fine‑thread fastener for XCMG RP705 medium crawler asphalt paver.

Product Detail

Product Tags

description

This genuine drive sprocket is cast from high‑hardenability manganese alloy cast steel. The substrate is quenched and tempered, while all working teeth are medium‑frequency induction hardened for uniform hard layer. The tooth root retains sufficient toughness to resist impact and tooth chipping. The tooth profile is optimized to match original track links for smooth meshing and reduced jumping or gnawing. Mounting holes, pitch circle and tooth pitch follow official host drawings, directly compatible with original track links and travel reducer flange without on‑site modification. Built for repeated impact loads, it withstands continuous abrasion from gravel, asphalt mix and mud. It replaces worn, chipped or ovalized old sprockets to restore traction and running stability.

product parameters

Part Number: 200635169
Name: Drive Sprocket
Type: Track drive wheel
Material: Manganese alloy cast steel
Heat Treatment: Overall quenching & tempering plus tooth induction hardening
Drive Type: Meshing drive for track links
Matching Parts: Travel reducer, track assembly
Applicable Machine: XCMG RP705 medium crawler asphalt paver and compatible XCMG crawler undercarriage with matching tooth profile and mounting dimension

Applicable Scenarios

Mounted at the output end of travel reducers on both sides of RP705 paver to deliver power during paving, relocation and steering.

advantage

• OEM tooth profile meshes perfectly with original RP705 track links for smooth operation and reduced chain wear
• Alloy cast steel with hardened teeth delivers excellent wear and impact resistance to avoid chipping
• Accurate flange hole layout aligns easily with travel reducer for straightforward installation
• Controlled hardening depth preserves toughness at tooth root to absorb impact on uneven job sites
• High compatibility for full undercarriage replacement and reduces one‑side slipping and machine drift
• Factory non‑destructive inspection eliminates casting defects for higher reliability than aftermarket sprockets

FAQ

Q: Does this drive sprocket fit XCMG RP705 paver?
A: Yes. Part No. 200635169 is genuine XCMG drive sprocket for the travel undercarriage of RP705 medium crawler asphalt paver.

Q: When should a drive sprocket be replaced?
A: Replace if teeth are sharply worn, spalling, cracked, chipped, bore ovalized, or the track slips and skips frequently.

Q: Can I replace only the sprocket without changing the track?
A: Single replacement is allowed. If track links are also heavily worn, replace both together, otherwise mismatched old and new parts accelerate wear.

Q: Is lightly worn sprocket usable?
A: Minor wear is acceptable for short‑term service. Hook‑shaped worn teeth ruin meshing and will quickly wear out the whole track.

Q: How to maintain the drive sprocket?
A: Keep the undercarriage clean and flush asphalt and mud from tooth gaps. Maintain proper track tension and check mounting bolts periodically.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us