200635917 front middle guard for XCMG RP705 paver spare parts

200635917 front middle guard for XCMG RP705 paver spare parts Featured Image
  • 200635917 front middle guard for XCMG RP705 paver spare parts

Short Description:

805006285, Bolt M20×65, suitable for XCMG RP705 medium crawler paver. It is a high‑strength fastening bolt for construction machinery, widely used on heavy‑load positions such as feeding assembly supports, drive bases, guard brackets and hinge bases.

Product Detail

Product Tags

description

This genuine front middle guard is cut and bent from carbon steel plate with accurately positioned mounting holes and a profile matching the central structure under the hopper. It is derusted and coated with anti‑corrosion paint for high rigidity and impact resistance. During continuous feeding, material discharged from the hopper converges toward the center. This guard acts as the primary barrier to absorb stone impact, reduce hot asphalt buildup and keep grit out of flip‑plate hinges and chain gaps, lowering the risk of scored pins and damaged hoses. Torn, heavily deformed, elongated holes or widespread rust expose central moving parts to grit, jamming and accelerated seal wear. Replace it if severely damaged during overhaul.

product parameters

  • Part No.: 200635917
  • Name: Front Middle Guard
  • Applicable Model: XCMG RP705 medium crawler paver
  • Material: Carbon structural steel plate
  • Process: CNC cutting, bending, drilling, deburring, derusting, anti‑corrosion painting
  • Matching parts: Fixing bolts, flat washers
  • Function: Protect hinge pins, pipelines and conveying parts at the front center of feeding assembly, block aggregate impact, isolate moving parts and reduce material jamming

Applicable Scenarios

Front‑center protection for paver feeding assembly; replacement for deformed, torn or rusted old guards; shielding directly beneath the hopper center; renewal of full front feeding protection set; pre‑assembly for front feeding sections of new machines.

advantage

- Original formed profile matches the machine perfectly and aligns neatly with left and right front guards for easy fitting
- Robust steel plate catches central falling material from the hopper and protects costly central hinges and hydraulic parts
- Anti‑corrosion coating resists hot asphalt and muddy water and slows rust formation
- Well‑designed clearance avoids interference with flip plates and chains and reduces material buildup
- Separate individual guard for quick replacement without removing the whole front protection assembly, saving time and cost

FAQ

Q: Can a slightly dented guard be straightened and reused?
A: It can be reused after cleaning and straightening if there are no cracks or stretched mounting holes. If it is torn or has cracked welds, replacement is recommended.

Q: Can the front middle guard be swapped with left or right front guards?
A: No. The front middle guard has a dedicated central shape with different width and bending profile and is not interchangeable.

Q: How to remove caked asphalt on the guard?
A: Scrape asphalt gently with soft tools after the machine fully cools down. Avoid heavy hammering to prevent plate deformation and paint peeling.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories