201000736 baffle for XCMG RP705 paver spare parts

201000736 baffle for XCMG RP705 paver spare parts Featured Image
  • 201000736 baffle for XCMG RP705 paver spare parts

Short Description:

201025732, Roller, suitable for XCMG RP705 medium crawler paver. It is a feeding guide roller, a supporting rolling part matched with the conveying chain.

Product Detail

Product Tags

description

This original stop plate is stamped from high-quality carbon structural steel plate with flat surface. Mounting holes and cutouts are fabricated strictly according to original drawings. After quenching and tempering plus black oxide anti-rust treatment, it delivers satisfactory rigidity and impact resistance. While the paver continuously conveys high-temperature asphalt mixture, the stop plate provides axial stop and shares transient impact load on circlips. It also acts as a simple barrier, reducing blows from hard aggregate to oil seals and bearing grooves and lowering premature seal failure. If the stop plate deforms, cracks or has elongated mounting holes, its limiting and shielding function fails, which may lead to bearing shifting and circlip ejection. It should be inspected carefully once removed during disassembly of feeding rollers, tension assemblies and sprocket sets, and replaced if damaged.

product parameters

- Part No.: 201000736
- Name: Stop Plate
- Applicable Model: XCMG RP705 medium crawler paver
- Material: Carbon structural steel
- Process: Stamping, drilling, quenching and tempering, black oxide anti-corrosion
- Function: Axial limiting, shielding, impact buffering, protection for bearings and seal assemblies

Applicable Scenarios

Limiting and shielding for paver feeding roller assemblies; axial stop for tension shafts and driven wheel assemblies; side shielding for feeding sprocket bearings; supporting replacement during transmission overhaul; pre-assembly protection for new feeding transmission components.

advantage

-Original profile with accurate holes and outline for easy fitting without on-site trimming
-Sufficient rigidity to withstand aggregate impact and share impact load on circlips
-Black oxide anti-corrosion finish resists muddy water and asphalt dust on construction sites
-Thin and compact structure without interference with chain and roller rotation
-Low-cost protective part; synchronous replacement during overhaul reduces transmission failure risk

FAQ

Q: Can a slightly deformed stop plate be straightened and reused?
A: Straightening for reuse is not recommended. Internal stress remains after straightening, and repeated vibration and impact will easily trigger re-deformation or fracture. New replacement is preferred for reliable operation.

Q: What requirements apply to fastening bolts during installation?
A: Use matched original bolts and tighten them evenly in diagonal sequence. Rotate rollers and chain manually after assembly to confirm no scraping or abnormal noise.

Q: What is the difference between a stop plate and a circlip?
A: The circlip locks axially by clamping into the groove, while the stop plate serves as an outer shield and stop to absorb impact and protect circlips and oil seals from aggregate blows. They work as a pair.

Q: Can stop plates with identical part number be interchanged between left and right feeding sides?
A: Interchange is allowed with matching part number. Pay attention to orientation so that the shielding face faces the incoming material impact.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories