201028125 support assembly for XCMG RP705 paver spare parts

201028125 support assembly for XCMG RP705 paver spare parts Featured Image
  • 201028125 support assembly for XCMG RP705 paver spare parts

Short Description:

Part No.201002788, Right Bearing Housing, fits XCMG RP705 medium crawler paver. It is the dedicated right bearing housing for the feeding drive system.

Product Detail

Product Tags

description

This support bracket assembly is fabricated from thick steel plates by welding, with post-weld stress relief. It features high overall rigidity and excellent torsion and impact resistance. It integrates base and supporting plates with standard pre-drilled holes for direct installation of left and right bearing housings and full feeding drive parts. It fastens the whole feeding drive assembly onto the paver frame, continuously buffers alternating chain tension and material impact, reduces vibration transmission to the frame and lowers fatigue failure of surrounding components. Designed for the feeding mechanism of XCMG RP705 paver, it is the load-bearing foundation of feeding drive. Its deformation and weld integrity must be inspected during feeding system overhaul.

product parameters

- Part No.：201028125
- Name：Support Bracket Assembly
- Applicable Model：XCMG RP705 Medium Crawler Paver
- Matching Parts：Left Bearing Housing, Right Bearing Housing, Feeding Drive Shaft, Sprocket, Fastening Bolts
- Material：Welded Steel Structure
- Function：Support and fix complete feeding drive assembly, absorb impact and vibration, locate transmission components

Applicable Scenarios

Mounted on the frame of XCMG RP705 paver as the load-bearing base for feeding drive. Widely used in asphalt paving projects including municipal roads, expressways, factory pavements and airport runways.

advantage

▪ Welded structure with thick plates provides high load capacity and good resistance against distortion
▪ Post-weld stress relief prevents weld cracking under long-term vibration
▪ OEM hole layout perfectly matches bearing housings and frame with great interchangeability
▪ Integrated design ensures reliable positioning and drive shaft coaxiality to reduce chain wear
▪ Effectively absorbs impact, lessens component fatigue and extends service life of feeding parts
▪ Modular assembly for convenient disassembly and replacement during maintenance

FAQ

Q: Can a slightly deformed support bracket be straightened and reused?
A: Straightening for reuse is not recommended. Residual stress will remain, which leads to recurrent cracking under impact and shaft misalignment.

Q: Can tiny cracks on welds be repaired by welding?
A: Short cracks on non-primary load paths may be patched temporarily. Direct replacement is recommended for long-term operation to avoid fracture risk.

Q: Which components should be inspected while replacing this bracket assembly?
A: Check left and right bearing housings, drive shaft, sprocket and chain for uneven wear and deformation to guarantee coaxial alignment.

Q: What are typical signs of failed support bracket assembly?
A: Excessive chain wear, frequent chain jumping, periodic transmission noise, recurring loose bolts and drive assembly displacement in severe cases.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories