209901246 AR3628-1 Right blade for XCMG RP705 paver spare parts

Short Description:

Upper Cover Plate, Part No.200635114, is a protective cover matched with the auger housing of XCMG RP705 medium crawler paver.

Product Detail

Product Tags

description

This right auger blade is stamped from high-wear alloy steel and heat-treated for hardness, with mounting holes and right-hand spiral profile, matched with left-hand blades. During paving, the rotating blade is continuously rubbed and impacted by hot asphalt and grit to spread material evenly across the paving width and reduce segregation. Long-term abrasion leads to thinning, chipping and curling. Worn blades cause poor spreading and segregation. Broken blades trigger material jamming and abnormal noise, requiring timely replacement.

product parameters

Part No.:209901246
Product Name:Right Auger Blade
Model:AR3628-1
Rotation Direction:Right-hand
Material:Wear-resistant alloy steel, heat treated
Processing:Stamping
Working Condition:Hot asphalt mixture, continuous abrasive wear and heavy load
Function:Mounted on the right auger shaft to convey asphalt mixture horizontally, control material flow, reduce segregation and guarantee uniform paving

Applicable Scenarios

Used on the right auger of XCMG RP705 paver, paired with left blades. Replace when heavily worn, chipped or broken.

advantage

▪ Original AR3628-1 profile, precise curve and mounting holes for perfect fit
▪ Heat-treated wear-resistant alloy, good anti-abrasion performance for asphalt and grit
▪ Standard right-hand spiral angle for smooth conveying without material buildup
▪ Easy bolt-on installation for fast on-site service
▪ Matched with left blades to achieve uniform full-width paving and reduce segregation

FAQ

Q:Can right and left blades be interchanged?
A:No. They have opposite spiral directions and push material in different directions. Install by handedness.

Q:Can slightly worn blades stay in service?
A:Minor edge wear without chipping is acceptable for short-term use. Replace once chipped or thinned.

Q:What should be checked during blade replacement?
A:Ensure tight fit to the auger shaft, fasten bolts, and keep consistent pitch to avoid scraping the trough.

Q:What causes fast blade wear?
A:High grit content in mixture, excessive auger speed and small clearance between blade and trough.

Q:Is extra hardfacing required for new blades?
A:The original blade is already heat-treated. Hardfacing is optional for severely abrasive conditions.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us