225-5458 engine connecting rod CAT spare part

Short Description:

1N-3822 CAT connecting rod bearing with 31.75 mm width, fits 3204 engine. It is 0.020″ undersized rod bearing. It is installed between connecting rod and crankshaft rod journal, forms hydrodynamic oil film with engine oil, withstands alternating combustion load and reduces friction wear, serving as special wear-resistant part for engine overhaul after crankshaft regrinding.


Product Detail

Product Tags

description

This CAT connecting rod is die-forged from high-quality alloy steel, adopting hydraulically fractured split structure with Grade G orange mark. The rod body, big end and small end bores are precision bored, and the small end is equipped with wear-resistant copper bushing. It is suitable for CAT 313C, 315C excavators, 414E, 416E, 420E, 422E, 428E backhoe loaders, asphalt pavers and generator sets equipped with 3054C / C4.4 engine. It belongs to the same connecting rod group with 225-5451, 225-5453, 225-5454, 225-5459, and different grades cannot be mixed. The small end bushing matches piston pin, and the big end with bearing shells wraps crankshaft journal. It bears alternating impact, tensile and compressive stress during combustion stroke, and is key overhaul replacement part for C4.4 diesel engine.

Part number: 225-5458
Brand: CAT
Type: engine connecting rod
Grade mark: Grade G (orange)
Structure: hydraulically fractured connecting rod
Fit: 3054C, C4.4 engine, 313C excavator, 416E/420E backhoe loader
Material: Corrosion Preventative Fluid
Processing: die forging, quenching and tempering, precision boring, hydraulic fracturing, oil passage cleaning, anti-rust surface treatment
Matching parts: connecting rod bearing, piston pin, piston pin bushing, connecting rod bolt, rod cap

Advantages:

1. Forged alloy steel base with quenching and tempering treatment, excellent fatigue resistance, suitable for long-time intermittent heavy load of C4.4 construction machinery
2. Precisely meshed fractured split surface, tight fit, stable coaxiality after locking, reduces uneven bearing wear
3. Copper bushing at small end has stable wear resistance, reduces piston pin wear and abnormal noise, extends service life of connecting rod assembly
4. OEM grade control, orange Grade G mark, matched grade rod must be used for replacement on the same engine for accurate fit

Capable of withstanding high forces and vibrations.
Able to endure the heat and stress generated during engine operation.
Designed to optimize engine efficiency and power output.

FAQ 

Q: What faults will be caused by damaged connecting rod?
A: Connecting rod knocking noise, low oil pressure and power loss. In severe cases, broken rod penetrates cylinder block and destroys crankshaft, leading to total engine failure.

Q: Can this connecting rod be purchased separately?
A: It can be purchased separately. Please pay attention to grade mark. Grade G orange rod cannot be mixed with F/H/J/K grade rods. Replace rod, bearings and bolts together for the same cylinder during overhaul.

Q: Is it recommended to replace connecting rod bearings together?
A: Yes. Worn old bearings have excessive clearance and may cause bearing seizure.

Q: Where does failure mainly occur?
A: Transition fillet of rod body, small end copper bushing, fractured joint surface and stress zone of bolt holes.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us