272-0445 engine connecting rod CAT spare part

Short Description:

624-0331 CAT connecting rod bearing, sliding bearing shell for connecting rod big end. It is installed between connecting rod and crankshaft rod journal, forms hydrodynamic oil film with engine oil, withstands alternating combustion load and reduces friction wear, serving as key wear-resistant part for engine overhaul.


Product Detail

Product Tags

description

This CAT connecting rod is die-forged from high-quality alloy steel. The rod body, big end and small end bores are precision bored. The big end adopts split bolt locking structure, and the small end is fitted with copper bushing. It is suitable for CAT 303C CR, 303.5C, 303.5D, 305.5D mini excavators equipped with Mitsubishi S3Q2 / S3Q2T engine. The small end bushing matches piston pin, and the big end with bearing shells wraps crankshaft journal. It bears alternating impact, tensile and compressive stress during combustion stroke, and is key overhaul replacement part for S3Q2 small diesel engine.

Part number: 272-0445
Brand: CAT
Type: engine connecting rod
Replacement part number: 32C19-05100, 32C19-00014
Fit: S3Q2, S3Q2T engine, 303C CR/303.5C/303.5D/305.5D mini excavator
Material: alloy steel + copper bushing at small end
Processing: die forging, quenching and tempering, precision boring, split machining, oil passage cleaning, anti-rust surface treatment
Matching parts: connecting rod bearing, piston pin, piston pin bushing, connecting rod bolt, rod cap

Advantages:

1. Forged alloy steel base with quenching and tempering treatment, good toughness, suitable for frequent start-stop and intermittent heavy load of mini excavators
2. Copper bushing at small end has excellent wear resistance, reduces piston pin wear and extends service life of connecting rod assembly
3. High-precision split big end, stable coaxiality after locking, reduces uneven bearing wear
4. Stable interchangeability, direct replacement for original parts, compatible with S3Q2 series equipment, easy installation

• Acts as conduits in preventing overheating and maintaining optimal temperatures
• Withstands the forces generated during engine operation, including combustion pressures and inertial loads

FAQ 

Q: What faults will be caused by damaged connecting rod?
A: Connecting rod knocking noise, low oil pressure and power loss. In severe cases, broken rod penetrates cylinder block and destroys crankshaft, leading to total engine failure.

Q: Can this connecting rod be purchased separately?
A: It can be purchased separately. Replace rod, bearings and bolts together for the same cylinder during overhaul.

Q: Is it recommended to replace connecting rod bearings together?
A: Yes. Worn old bearings have excessive clearance and may cause bearing seizure.

Q: Where does failure mainly occur?
A: Transition fillet of rod body, small end copper bushing, big end joint surface and stress zone of bolt holes.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us