359-0722 engine connecting rod CAT spare part

Short Description:

8N-1984 CAT engine connecting rod, fits 3304 and 3306 engines. It transfers combustion thrust from piston to crankshaft and converts reciprocating linear motion into rotary torque, serving as core load-bearing component for 235, 245 excavators and 966 series wheel loaders.


Product Detail

Product Tags

description

This CAT connecting rod is die-forged from high-quality alloy steel. The rod body, big end and small end bores are precision bored. The fractured split design of big end ensures stable positioning accuracy. It is suitable for CAT 312D2, 313D2, 316GC, 318D2L, 320GC, 320D2GC excavators, 420F, 430F backhoe loaders, CS12GC compactors and generator sets equipped with C4.4 / 3054C engine. The small end with bushing connects piston via piston pin, and the big end with bearing shells wraps crankshaft journal. It bears alternating impact, tensile and compressive stress during combustion stroke, and is key overhaul replacement part for C4.4 diesel engine.

Part number: 359-0722
Brand: CAT
Type: engine connecting rod
Fit: C4.4, 3054C engine, 312D2/313D2/316GC/318D2L/320GC excavator, 420F/430F backhoe loader, CS12GC compactor, generator set
Total height (mm): 40.13
Total length (mm): 299.97
Total width (mm): 104.9
Material: Corrosion-preventive fluid
Processing: die forging, quenching and tempering, precision boring, fractured splitting, oil passage cleaning, anti-rust surface treatment
Matching parts: connecting rod bearing, piston pin, piston pin bushing, connecting rod bolt, rod cap

Advantages:

1. Forged alloy steel base with excellent fatigue resistance, suitable for long-term heavy load of C4.4, not easy to bend or fracture
2. Fractured split surface fits tightly, good coaxiality after assembly and reduces uneven bearing wear
3. Optimized rod cross-section balances strength and weight, lowers reciprocating inertia impact for stable engine operation
4. OEM dimension standard, well compatible with C4.4 crankshaft, piston pin and bearing shells

FAQ 

Q: What faults will be caused by damaged connecting rod?
A: Connecting rod knocking noise and low oil pressure. In severe cases, broken rod penetrates cylinder block and destroys crankshaft, leading to total engine failure.

Q: Can this connecting rod be purchased separately?
A: It can be purchased separately. Replace rod, bearings and bolts together for the same cylinder during overhaul.

Q: Is it recommended to replace connecting rod bearings together?
A: Yes. Worn old bearings have excessive clearance and may cause bearing seizure.

Q: Where does failure usually occur?
A: Transition fillet of rod body, big end split area and stress zone of bolt holes.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us