389-5182 Connecting rod bearing CAT spare part

Short Description:

This is Cat F-grade fractured connecting rod assembly for 3054,3054B,3054C,3054E,3056E engine, transmits piston power to crankshaft for engine overhaul.


Product Detail

Product Tags

description

Cat 389-5182 connecting rod bearing is a core wear-resistant part of engine crank connecting rod mechanism. It is standard STD size rod bearing, sold in pairs, installed between connecting rod big end and crank journal. It forms hydrodynamic oil film to separate metal contact, absorbs combustion impact load and reduce wear of crankshaft and connecting rod. It fits Cat C3.8 diesel engine, widely used on excavators, loaders and backhoe loaders. It is essential replacement part for engine overhaul when bearing scored or clearance out of tolerance, suitable for heavy-duty and high-temperature working conditions.

Product Name: Connecting Rod Bearing
Part Number: 389-5182
Size: STD Standard
Engine Fit: C3.8
Package: Pair (2 pcs)
Material: Carbon Steel

Advantages:

1. Multi-layer composite alloy structure, soft surface alloy embeds tiny debris in oil and protects crank journal from scratches
2. Precise wall thickness tolerance, stable oil film clearance after installation, maintains oil pressure and prevents bearing seizure
3. Fine finished surface with good fitting, strong load capacity to withstand cyclic impact from combustion pressure
4. High-temperature resistant coating, resists coating peeling and fatigue pitting under long heavy load
5. STD standard size, no crankshaft grinding required if journal is intact, saves overhaul time
6. Supplied as matched pair, consistent thickness for two halves, avoids uneven load on connecting rod

• Minimize friction between the connecting rod and the crankshaft.
• Distribute loads evenly across the crankshaft journals.
• Effectively dissipate heat generated by friction.
• Resist wear and degradation under heavy loads.

FAQ 

Q: Is this an oversize bearing?
A: No, 389-5182 is STD standard size. Oversize bearings are used when crank journal is worn.

Q: How many bearings per connecting rod?
A: One pair (2 pieces) for one rod, 4 pairs for full overhaul of 4-cylinder C3.8 engine.

Q: Can I mix this bearing with connecting rods of other brands?
A: Better use matched original parts. Different brands have different thickness tolerance and may cause abnormal clearance.

Q: Can I only replace the bearing after bearing seizure?
A: No. You must check crank journal and connecting rod for deformation before fitting new bearings.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us