419-6110 alternator DA guard CAT C18 engine spare part

Short Description:

Part No.245-3508, CAT brand new alloy steel crankshaft damper adapter, converts bolt pattern between crank flange and torsional damper, transmits torque and maintains concentricity. Fits C32 engines, matched with 382-8019 damper for mining trucks and large wheel loaders.


Product Detail

Product Tags

description

This 419-6110 is protective cover for drive end of CAT DA alternator. It is stamped from cold rolled steel plate with cutouts for belt service. It shields belt and pulley from rock and grit, avoids belt damage and jam. It also provides safety barrier for rotating parts. Deburring and anti-rust coating are finished before delivery. Bolt holes and inner contour are dedicated for DA alternator, widely used for front accessory drive overhaul.

Part No.:419-6110
Name:CAT Alternator DA Guard
Material:Polyethylene Plastic
Fit engine:C15, C16, C18, DA type alternator
Process:Brand new OEM, stamping, deburring, anti-rust coating
Mounting position:Alternator drive end, outside of pulley

Advantages

1. Contour matches DA alternator pulley, proper clearance without rubbing belt
2. Tough steel plate, impact resistant against rock strike in mining site
3. Service cutout for belt inspection, reduce disassembly workload
4. Anti-corrosion coating performs well under dusty and humid site conditions

FAQ 

Q1:Can 419-6110 fit other alternators?
A:No. Inner profile and bolt holes are dedicated for DA drive end alternator.
Q2:Is this guard a Reman part?
A:No. It is brand new OEM stamped steel guard.
Q3:What risk if damaged guard remains in service?
A:Rocks cut drive belt, debris jam belt and cause shutdown, safety hazard.
Q4:Is this guard mandatory for generator set?
A:Required for open mining site; optional for clean indoor generator application.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us