458-3400 flywheel CAT spare part

Short Description:

This is Cat gray cast iron engine flywheel, stores rotational inertia to smooth engine operation, starter ring gear can be heat fitted on outer rim, replacement for cracked or out-of-balance flywheel.


Product Detail

Product Tags

description

Cat 458-3400 flywheel is rear energy storage component for mid-small engines. It is integrally cast from gray cast iron and mounted on crankshaft flange. It stores rotational energy to smooth engine speed fluctuation. Outer rim is prepared for heat fitting starter ring gear, rear face connects to clutch or torque converter. It fits Cat C4.4, C6.6, C7.1 engines, used on wheel loaders, material handlers, generator sets and compact track machines, suitable for construction, forestry and pump set continuous operation. Aged and dynamically balanced after casting. Replace it when cracked, deeply scored, bolt hole damaged or unbalanced, to reduce vibration and protect crankshaft and bearings.

Product Name: Engine Flywheel
Part Number: 458-3400
Material: Gray cast iron (flake graphite), anti-corrosion oil
Process: Integral casting, aging treatment, dynamic balance test
Accessories: Starter ring gear, flywheel bolts and clutch parts sold separately

Advantages:

1. Good damping performance of gray cast iron, smooth speed fluctuation for mid-small displacement engines
2. Factory dynamic balance calibration, low vibration during high-speed operation
3. Precision machined friction face with stable flatness for clutch transmission
4. Standard outer rim reference for ring gear heat fitting, good interchangeability
5. Stable fatigue resistance for frequent start-stop cycles of compact construction machines
6. Standard OEM bolt layout, direct replacement without modification

FAQ 

Q: Does this flywheel include starter ring gear?
A: No, ring gear, bolts and clutch parts are sold separately.

Q: Can flywheel with minor scratches keep working?
A: Light scratches can be polished. Replace if cracked, deeply scored or out of balance.

Q: What causes engine vibration after installation?
A: Lost balance, excessive runout, deformed crank flange or uneven bolt torque.

Q: Can flywheel bolts be reused?
A: Not recommended. Bolt strength degrades after stretching, new bolts are preferred for overhaul.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us