478-5318 connecting rod bearing shell CAT spare part

Short Description:

478-5317 CAT connecting rod bearing, sliding bearing shell for connecting rod big end. It is installed between connecting rod and crankshaft journal, forms hydrodynamic oil film with engine oil, withstands combustion impact load and reduces friction wear, serving as key wear-resistant part for engine overhaul.


Product Detail

Product Tags

description

This CAT connecting rod bearing adopts steel back with multi-layer anti-friction alloy composite structure, equipped with locking tang to avoid rotation after assembly. It fits construction CAT diesel engines. Mounted inside connecting rod big end bore and wrapping crankshaft journal, it builds oil film by engine oil pressure, converts metal contact friction into hydrodynamic lubrication. It bears alternating compression and impact load, protects journal and rod bore, and is inspected and replaced during engine overhaul or seizure repair.

Part number: 478-5318
Brand: CAT
Type: connecting rod bearing shell
Material: Steel Backed Copper-Lead Bearing
Processing: steel strip rolling, alloy sintering, semi-circle forming, split precision machining, anti-rust treatment
Matching parts: connecting rod, connecting rod bolt, crankshaft journal, oil cooling nozzle

Advantages:

1. Check alloy surface for scratches, burning, spalling and indentation after disassembly. Replace the whole set once damaged
2. Clean burrs and sludge on rod big end bore and journal, ensure oil passages are fully clear before installation
3. Align locking tang correctly, do not strike alloy surface, coat assembly oil evenly
4. Tighten connecting rod bolts step by step to specified torque, check rod side clearance and monitor oil pressure on test run

FAQ 

Q: What faults will be caused by damaged connecting rod bearing?
A: Connecting rod knocking noise and low oil pressure. In severe cases, alloy layer melts and seizes the shaft, scoring crankshaft journal and causing serious engine damage.

Q: Can this connecting rod bearing be purchased separately?
A: It can be purchased separately. Full set replacement is recommended for engine overhaul.

Q: Is it recommended to inspect crankshaft journal while replacing bearings?
A: Yes. Check journal roundness and taper. If wear exceeds limit, regrind journal before fitting undersize bearings.

Q: Where does failure usually occur?
A: Alloy friction surface, area around oil hole and tang edge.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us