510-0116 suspension cylinder bearing cap CAT spare part

Short Description:

277-6911 CAT idler shaft with 129.86 mm outer diameter, support spindle for idler gear. It is mounted in engine gear housing to position and support idler gear, stabilize gear meshing, adjust backlash and assist power transmission.


Product Detail

Product Tags

description

This CAT suspension cylinder bearing cap is made of high-strength cast steel with precision machined mating surface and good flatness. It is installed at the hinge position of suspension cylinder on large mining dump truck, compresses the bearing assembly and limits axial movement. It protects internal bearings and bushings, isolates rock debris and mud on mining sites to prevent premature wear. It bears alternating impact and lateral force during bumpy travel, ensures smooth rotation of suspension cylinder hinge joint. It serves as overhaul replacement part for CAT mining truck suspension cylinder.

Part number: 510-0116
Brand: CAT
Type: suspension cylinder bearing cap
Material: Sealants / Adhesives Adhesive
Processing: precision machining, stress relief treatment, anti-rust surface treatment
Matching parts: articulated bearing, bushing, seal ring, fastening bolt, washer

Advantages:

1. High-strength cast steel base, impact resistant, not easy to crack or deform under heavy bumpy mining conditions
2. High-precision mating surface provides even compression and controls bearing axial clearance effectively
3. Protective structure keeps sand and mud away from bearing mating surface and extends service life of bearing and bushing
4. OEM mounting hole layout, direct replacement, high compatibility with suspension cylinder housing and bearing assembly

FAQ 

Q: What faults will be caused by damaged suspension cylinder bearing cap?
A: Bearing axial play, excessive hinge clearance and abnormal noise. Sand intrusion accelerates bearing wear, and the suspension cylinder may jam in severe cases.

Q: Can this bearing cap be purchased separately?
A: It is an individual spare part available for separate purchase and replacement.

Q: Is it recommended to replace seals together?
A: Replacement is recommended. Failed seals allow mud and grit to enter the bearing quickly.

Q: Where does failure usually occur?
A: Compression mating surface and stress area of bolt holes.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us