581-3299 right front engine camshaft CAT generator spare part

Short Description:

Part No.581-3299, CAT right front engine camshaft, fits heavy-duty dual bank engine, installed at front of right cylinder bank, controls valve timing for right bank, works with left front camshaft, key overhaul spare part for mining machines.


Product Detail

Product Tags

description

This 581-3299 right front camshaft is designed for dual bank engine. It drives valve train of right cylinder bank separately to control valve opening timing, lift and duration, balancing cylinder power delivery. Forged alloy steel blank with high-frequency hardened and mirror finished cam lobes, good thermal load and fatigue resistance. It can be assembled with timing gear, woodruff key and thrust plate, suitable for long heavy-duty mining truck and large loader operation, separate replacement part for cylinder bank overhaul.

Part No.:581-3299
Name:CAT right front engine camshaft
Mounting position:Front of right cylinder bank
Structure:Separate camshaft for cylinder bank
Material:Alloy steel forging
Surface treatment:High-frequency hardening, mirror grinding

Application:3516E Generator set

Advantages

• Assists in reducing exhaust emissions by optimizing valve timing.
• Provides improved throttle response and engine acceleration.
• Supports proper engine operation under different load conditions.
• Enables smooth valve movement for quieter engine operation.

1. Dedicated cam lift profile for right bank, matched phase with left camshaft for stable combustion
2. Mirror ground cam surface, low friction, less oil temperature rise and spalling risk
3. Strict journal coaxiality control, uniform bearing load and low eccentric wear
4. Single side bank replacement available, no full engine disassembly required, lower overhaul cost

FAQ 

Q1:Can 581-3299 right front camshaft replace left front camshaft of same engine?
A:No. Cam phase and locating structure are different, left and right camshaft are not interchangeable.
Q2:Must left camshaft be replaced together with this right front camshaft?
A:Not mandatory. Inspect left camshaft separately and replace it if worn severely.
Q3:What to check first if right bank power is weak after replacement?
A:Check timing phase, valve clearance, cam bearing clearance and tappet condition first.
Q4:How to protect cam lobes during long term storage?
A:Clean, apply anti-rust oil, wrap with anti-rust paper and support at multiple points.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us