609-9390 left front engine camshaft CAT generator spare part

Short Description:

Part No.609-9390, CAT left front engine camshaft, fits heavy-duty dual bank engine, installed at front of left cylinder bank, controls valve timing for front cylinders on left bank, works with 581-3299, 581-3303 and 581-3305, overhaul spare part for large mining machinery.


Product Detail

Product Tags

description

This 609-9390 left front camshaft is independent for the front section of left cylinder bank. It drives valve train for front cylinders on left bank and controls valve lift, timing and duration. It is phase matched with the other three camshafts to balance engine power. Forged alloy steel blank with high-frequency hardened and mirror polished cam lobes, good resistance to contact fatigue and thermal shock. It is built for heavy-duty mining trucks and large electric loaders, can be assembled with thrust plate, woodruff key and timing gear, available for separate front bank overhaul.

Part No.:609-9390
Name:CAT left front engine camshaft
Mounting position:Front of left cylinder bank
Structure:Independent front camshaft for left cylinder bank
Material:Alloy steel forging
Surface treatment:High-frequency hardening, mirror grinding
Weight: 53.52kg

Application:G3520K Generator set

Advantages

• Maintains valve timing across the engine speed range.
• Promotes effective fuel combustion and exhaust regulation.
• Supports variable valve timing mechanisms.

1. Dedicated cam profile for left front bank, phase synchronized with other three camshafts for stable combustion
2. Mirror ground cam surface, low friction, reduce pitting, spalling and scoring under high temperature
3. Strict coaxiality for multiple journals, uniform bearing load and low seizure risk
4. Single camshaft replacement available, no full engine disassembly required, save overhaul time and cost

FAQ 

Q1:Can 609-9390 replace 581-3303 left rear camshaft?
A:No. Lobe layout, timing phase and locating structure are different, front and rear are not interchangeable.
Q2:Must other camshafts be replaced together with 609-9390?
A:Not mandatory. Inspect other camshafts separately and replace them if worn severely.
Q3:What to check first if left front cylinders lack power after replacement?
A:Check timing phase, valve clearance, stuck tappets and cam bearing clearance first.
Q4:How to protect cam lobes during long time storage?
A:Clean cam surface, apply anti-rust oil, wrap with anti-rust paper, support on journals instead of cam lobes.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us