641-7054 engine crankshaft with 99T gear CAT spare part

Short Description:

595-9136 Cat engine crankshaft for Cat 3516 engine, used on heavy mining equipment, converts piston reciprocating motion into rotary power.


Product Detail

Product Tags

description

This part is forged steel crankshaft for Caterpillar construction machinery. It comes with integrated 99-tooth signal gear. Main journals and rod journals are high-frequency quenched and precision ground. Integrated counterweights bear alternating impact loads and drive flywheel, torsional damper and timing components. The gear sends speed and phase signal to ECM, suitable for engine overhaul of large excavators and mining machines.

Part Number:641-7054
Name:Engine Crankshaft with 99T Gear
Teeth Count:99 Teeth (Signal Gear)
Material:Alloy Forged Steel
Process:Journal High-frequency Quenching, Precision Grinding, Dynamic Balancing, Signal Gear Machining
Type:One-piece Crankshaft with Signal Gear

Advantages

• Supports balanced rotation during engine operation.
• Helps reduce uneven rotational behavior.
• Allows consistent rotation under repeated cycles.

1. Forged blank delivers high fatigue resistance for long continuous heavy load in mining and construction sites.
2. Integrated 99-tooth signal gear with stable tooth profile, accurate speed signal acquisition and low signal loss risk.
3. Quenched hardened journals feature good wear resistance, reduce bearing friction loss and extend overhaul interval.
4. Factory dynamic balance calibration suppresses engine vibration and prevents premature failure of oil seals and bearings.

FAQ 

Q:What faults will damaged signal gear cause?
A:Damaged gear leads to signal loss, engine derate, no-start or intermittent shutdown.

Q:Can I grind the signal gear teeth on new crankshaft?
A:Gear grinding is forbidden. Tooth pitch and depth are ECU calibration reference, grinding causes signal error.

Q:What secondary problems will bent crankshaft trigger?
A:Bent crankshaft leads to vibration, bearing seizure and oil leakage, plus signal gear runout and unstable speed signal.

Q:Is damper replacement compulsory with crankshaft?
A:Check the rubber layer of damper. Replace it at the same time if rubber is degraded.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us