7C-3259 accessory drive shaft CAT spare part

Short Description:

466-9948 Cat fan drive support, front engine accessory bracket, holds fan drive assembly, keeps pulley and belt aligned for stable cooling fan transmission.


Product Detail

Product Tags

description

This accessory drive shaft is designed for Caterpillar 3500 series large-bore engines. It is forged from alloy steel with precision machining, splined on both ends and equipped with internal oil passage. It is installed between gear housing and accessory drive assembly. It transfers power from crank gear to accessory end to drive cooling fan and hydraulic pump. It withstands cyclic torsion load. It is widely used on mining trucks, generator sets and D11 dozer with 3508, 3512, 3516 and G35 gas engines. It is replacement part for accessory drive overhaul and torsion noise repair.

Part Number:7C-3259
Name:Accessory Drive Shaft
Flange diameter (mm): 129.86
Length (mm): 81.2
Outer diameter (mm): 105.88
Material: Low Alloy Steel
Structure:Double splined ends, with internal oil passage
Fit Engine:3508,3508B,3512,3512B,3512C,3516,3516C,G3508,G3512,G3516,G3520B,G3520J

Advantages

• Reduce the load on the engine’s main drive shaft.
• Apply engine oil or grease to reduce friction and wear.
• Perform regular inspections and maintenance to ensure proper operation.

1. Forged alloy steel with tempering, high torsion resistance, resistant to fracture and deformation under heavy load.
2. Built-in oil passage supplies pressurized oil to spline interface, reduces spline wear and seizure.
3. Precision spline profile ensures uniform meshing clearance, smooth transmission and less impact noise.
4. OEM length and spline specification, direct replacement for multiple 3500 series engines.

FAQ 

Q:Can accessory drive shaft with slightly worn splines stay in service?
A:Not recommended. Excessive spline clearance causes impact noise. Spline shear may stop fan and lead to overheating.

Q:What fault will blocked oil passage cause?
A:No lubrication for splines, rapid dry seizure and shaft breakage, fan shutdown and engine overheat.

Q:Should bearing be replaced together with drive shaft?
A:Replace bearing if noisy or out of tolerance. Old bearing damages new shaft quickly.

Q:Can similar-looking accessory drive shafts interchange?
A:No. Spline tooth count, total length and oil hole layout differ, wrong fit causes misalignment and poor lubrication.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us