7C-3261 auxiliary drive shaft CAT spare part

Short Description:

7N-3005 Cat auxiliary drive idler shaft, installed in front engine auxiliary gear housing, supports idler gear to adjust power path, stabilizes gear meshing and ensures reliable operation of hydraulic pump, fan and other accessories.


Product Detail

Product Tags

description

This auxiliary drive shaft is designed for large mining trucks and excavators. It is forged alloy steel with quenched and tempered treatment, splined on both ends and equipped with internal oil passage. It is fitted between gear housing and auxiliary drive assembly. It transfers power from gear train to front accessory drive and withstands cyclic torsion load. It ensures stable operation of cooling fan and hydraulic pump. It fits 777 series mining trucks and 5130B large excavators. It is replacement part for auxiliary drive overhaul and repair of spline wear or drive noise.

Part Number:7C-3261
Name:Auxiliary Drive Shaft
• Material: Steel
• Flange diameter: 130 mm (5.11 in)
• Outer diameter: 106 mm (4.17 in)
• Length: 81 mm (3.2 in)
• Hole size: 14 mm (0.55 in)
• Thread size: 3/8-16
Structure:Double splined ends, with internal oil passage
Fit Equipment:777B,777C,777D,785,789,5130B,5230B

Advantages

1. Tempered alloy steel delivers high torsion resistance, resistant to twisting and fracture under heavy mining load.
2. Built-in oil passage supplies pressurized lubricant to spline interface and prevents spline seizure.
3. Precision spline profile guarantees uniform meshing clearance, smooth transmission and less impact noise.
4. OEM spline dimension and length, direct replacement, keeps original accessory drive ratio.

FAQ 

Q:Can auxiliary drive shaft with slightly worn splines stay in service?
A:Long-term use is not recommended. Excessive clearance causes impact noise. Spline shear stops fan and leads to engine overheating.

Q:Should bearing and seal be replaced together with drive shaft?
A:Replace them if bearing loose or seal leaking, to protect new shaft.

Q:What fault will blocked oil passage cause?
A:No lubrication for splines, rapid seizure and shaft breakage, fan shutdown and engine overheat.

Q:Can similar-looking auxiliary drive shafts interchange?
A:No. Spline tooth count, total length and oil hole layout differ, wrong fit causes misalignment and poor lubrication.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us