803189179 hose assembly for XCMG RP705 paver spare parts

Short Description:

803103339, Hydraulic Fitting, genuine XCMG high‑pressure hydraulic adapter for XCMG RP705 medium crawler asphalt paver.

Product Detail

Product Tags

description

This genuine hose assembly adopts multi‑layer steel‑wire spiral reinforcement. The oil‑resistant inner tube prevents hydraulic fluid erosion, while the high‑strength steel wire reinforcement sustains cyclic pressure pulses. The heavy‑duty outer cover resists abrasion from asphalt aggregate, stone cuts and UV ageing. End fittings are permanently crimped for reliable connection. Thread, sealing cone, fitting angle and overall length follow original drawing specifications. No field cutting or crimping is required. It works with left hydraulic pipes, double pipe clamps and adapters, replacing worn hoses with bulges, seepage, cracked cover or exposed steel wire, and stabilises oil supply for the travel circuit to avoid power loss and safety risks caused by burst failure.

product parameters

Part Number: 803189179
Name: Hydraulic Hose Assembly
Type: Steel‑wire spiral reinforced high‑pressure hydraulic hose assembly
Construction: Oil‑resistant inner tube + multi‑layer steel‑wire reinforcement + abrasion‑resistant outer cover
Process: Factory pre‑crimped assembly
Working Fluid: Anti‑wear hydraulic oil for construction machinery
Features: High pressure resistance, pulse tolerance, oil resistance, abrasion resistance and long fatigue life
Applicable Machine: XCMG RP705 medium crawler asphalt paver and other XCMG machinery with matching fitting interface

Applicable Scenarios

It is deployed in the left undercarriage travel hydraulic circuit of RP705 paver to connect rigid pipes and travel motor, compensating displacement and vibration during paving, steering and climbing.

advantage

• Factory pre‑crimped unit with accurate length, fitting angle and sealing geometry for original routing
• Steel‑wire spiral construction delivers outstanding pulse fatigue resistance for continuous paving
• Reinforced outer rubber delays cover cracking from asphalt and grit impact
• Well‑aligned crimped fittings reduce separation and leakage risk
• Drop‑in installation eliminates on‑site fabrication and cuts downtime
• Pressure and pulse tested before delivery for better durability than field‑made hoses

FAQ

Q: Does this hose assembly fit XCMG RP705 paver?
A: Yes. Part No. 803189179 is genuine XCMG hydraulic hose assembly for designated travel hydraulic lines on RP705 medium crawler asphalt paver.

Q: When must a hydraulic hose be replaced?
A: Replace immediately if outer cover cracks, bulges, leaks, exposes steel wire, seeps at fittings or suffers permanent kinking.

Q: What rules apply during hose installation?
A: Do not twist the hose. Leave slack for movement. Keep it away from sharp edges and hot surfaces and secure with clamps.

Q: Can field‑crimped hose replace it permanently?
A: It works for emergency repair. Genuine pre‑crimped assembly is preferred for continuous paving with verified geometry and crimp quality.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us