860507239 Dustproof ring 80×90×6/8 for XCMG RP705 paver spare parts

Short Description:

O-ring 105×3.1, Part No.801100284, is a basic static hydraulic sealing part. It fills the sealing gap by elastic preload to block hydraulic oil leakage.

Product Detail

Product Tags

description

This dust seal is sized 80×90×6/8 and made of PU polyurethane with moderate hardness, good wear and tear resistance. Its lip faces outward. It scrapes dirt and debris off the rod surface when the piston rod retracts, preventing foreign matter from entering the cylinder and scratching seals and honed surface. It does not bear hydraulic pressure, only for external dust protection. It is usually assembled with U-cup and support ring, widely used on paver tension cylinder, hopper cylinder and screed lifting cylinder, a quick-wear part for cylinder maintenance.

product parameters

Part No.:860507239
Product Name:Dust Seal 80×90×6/8
Dimension:80×90×6/8
Material:PU Polyurethane
Function:Dust prevention, mud scraping, outer protection
Working Medium:Dust, muddy water (no hydraulic pressure load)

Applicable Scenarios

Installed outside the guide sleeve of paver tension cylinder, hopper cylinder and screed lifting cylinder, to scrape mud and dust on piston rod and prevent contaminants from entering cylinder.

advantage

▪ PU material, excellent tear resistance and muddy water resistance for long service life
▪ Optimized scraping lip for effective cleaning and contamination blocking
▪ Precise dimension, tight fit with guide sleeve groove
▪ Low friction, no interference to piston rod reciprocating movement
▪ Standard matching part for cylinder overhaul, recommended to replace together with seals

FAQ

Q:Is it normal for dust seal to leak oil?
A:Dust seal only blocks dust, not oil. Oil leakage means inner main seal is damaged.

Q:Can dust seal with flipped lip keep working?
A:Flipped, cracked or hardened lip loses scraping function, replace it.

Q:Installation direction requirement?
A:Scraping lip faces outward. Reverse installation leads to total dust protection failure.

Q:What happens if failed dust seal is not replaced?
A:Sand enters cylinder, scratches chrome rod, main seals and cylinder bore, causing internal and external leakage.

Q:Is grease needed for dust seal?
A:Light lubrication is enough. Excessive grease will trap sand and accelerate wear.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us