860517414 U-shaped ring 100×88×8.5 for XCMG RP705 paver spare parts

Short Description:

Support ring 100×95×15, Part No.860517413, is a guide accessory for hydraulic cylinder seals. It is installed on piston or guide sleeve of hydraulic cylinder to bear radial load, prevent eccentric wear of piston and piston rod and protect sealing elements.

Product Detail

Product Tags

description

This U-cup seal is sized 100×88×8.5, mostly made of PU polyurethane with excellent elasticity, wear and extrusion resistance. The U opening faces the pressure oil chamber. When oil pressure rises, the lip expands and fits tightly for automatic pressure compensation. It is usually assembled together with support rings, widely used on tension, hopper and screed lifting cylinders. It is the main sealing component for cylinder overhaul, suitable for reciprocating sealing of construction machinery.

product parameters

Part No.:860517414
Product Name:U-cup Seal 100×88×8.5
Dimension:100×88×8.5
Material:PU Polyurethane
Sealing Type:U-lip self-energized seal
Working Medium:Hydraulic oil
Matching Parts:Support ring, back-up ring
Applicable Model:XCMG RP705 medium crawler paver

Applicable Scenarios

Suitable for reciprocating sealing on piston or rod of paver tension cylinder, hopper cylinder and screed lifting cylinder, preventing oil leakage and ensuring cylinder pressure holding and stable movement.

advantage

▪ PU material, excellent tear resistance, wear resistance and hydraulic oil compatibility
▪ Self-energized U lip, tighter sealing under higher pressure to compensate wear gap
▪ Precise dimension, good groove fit and easy installation
▪ Can be combined with support and back-up ring for anti-extrusion under high pressure
▪ Moderate friction during reciprocating motion, low heat generation, widely used for maintenance

FAQ

Q:Is installation direction important for U-cup?
A:Yes. The U opening must face the high-pressure oil side. Reverse installation causes leakage.

Q:What causes extrusion damage of U-cup?
A:Excessive pressure, large groove clearance or missing back-up/support ring will tear the lip.

Q:Can U-cup replace O-ring?
A:Not recommended. U-cup is designed for dynamic reciprocating seal, O-ring is mainly for static seal.

Q:How to prepare the groove before installation?
A:Clean dirt and burrs, check bore scratches. Smooth sharp edges to avoid cutting new seal.

Q:Can hardened or cracked U-cup keep working?
A:No. Aging leads to loss of elasticity and sealing function, replace it immediately.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us