8N-3753 engine connecting rod CAT spare part

Short Description:

1N-3821 CAT connecting rod bearing with 75.6 mm outer diameter, fits 3204 engine. It is installed between connecting rod and crankshaft rod journal, forms hydrodynamic oil film with engine oil, withstands alternating combustion load and reduces friction wear, serving as key wear-resistant part for engine overhaul.


Product Detail

Product Tags

description

This CAT connecting rod is die-forged from high-quality alloy steel with tapered big end structure. The rod body, big end and small end bores are precision bored, pre-installed with wear-resistant copper bushing at small end. It can replace 4N-2218, 6N-8011 and 0R-3274. It is suitable for CAT D3, D3C, D4H, D5C track tractors, 910,931,935C,943,953 track loaders, 215B, E180 excavators, skidders and generator sets equipped with 3204 engine. The small end bushing matches piston pin, and the big end with bearing shells wraps crankshaft journal. It bears alternating impact, tensile and compressive stress during combustion stroke, and is key overhaul replacement part for 3204 diesel engine.

Part number: 8N-3753
Brand: CAT
Type: engine connecting rod
Structure: tapered connecting rod
Small end bushing part number: 9N-5082
Replacement part number: 4N-2218, 6N-8011, 0R-3274
Fit: 3204 engine, D3/D4H track tractor, 910 wheel loader, 215 excavator
Material: alloy steel + copper bushing at small end
Processing: die forging, quenching and tempering, precision boring, taper machining, oil passage cleaning, anti-rust surface treatment
Matching parts: 8N-6308 connecting rod bearing, piston pin, connecting rod bolt, rod cap

Advantages:

1. Forged alloy steel base with quenching and tempering treatment, balanced strength and toughness, suitable for continuous heavy load of 3204 construction machinery
2. Pre-installed copper bushing at small end with stable wear resistance, reduces piston pin wear and abnormal noise
3. OEM tapered big end for uniform stress distribution, stable coaxiality after locking, reduces uneven bearing wear
4. Stable interchangeability. Full set replacement is recommended when replacing old straight rods, compatible with all 3204 series equipment, easy installation

FAQ 

Q: What faults will be caused by damaged connecting rod?
A: Connecting rod knocking noise, low oil pressure and power loss. In severe cases, broken rod penetrates cylinder block and destroys crankshaft, leading to total engine failure.

Q: Can this connecting rod be purchased separately?
A: It can be purchased separately. Note: full set replacement is required when changing straight rods to tapered rods. Replace rod, bearings and bolts together for the same cylinder during overhaul.

Q: Is it recommended to replace connecting rod bearings together?
A: Yes. Matched standard bearing part number 8N-6308. Worn old bearings have excessive clearance and may cause bearing seizure.

Q: Where does failure mainly occur?
A: Transition fillet of rod body, small end copper bushing, big end taper surface and stress zone of bolt holes.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us