8S-1491 camshaft lock plate CAT engine spare part

Short Description:

Part No.7E-7171, CAT engine camshaft for single cylinder bank of 35 series high-power diesel engine, drives valve train and controls intake and exhaust valve timing, overhaul spare part for mining trucks, marine engines and generator sets.


Product Detail

Product Tags

description

This 8S-1491 is thin steel lock plate for camshaft thrust plate assembly. It secures the fixing bolts by bending tabs to prevent loosening caused by vibration and thrust plate shifting. Made of cold stamped steel with good toughness, precise thickness will not interfere with axial clearance. It fits 3304 and 3306 engines on wheel loaders, motor graders and generator sets. It is a mandatory replacement part during camshaft overhaul.

Part No.:8S-1491
Name:CAT camshaft lock plate
Thickness:0.035 inch
Material: Steel
Structure:Two-hole lock plate with bending tab
Fit engine:3304, 3306

Advantages

1. Standard thickness, no influence on preset camshaft axial clearance
2. Good steel toughness, resistant to cracking after bending for reliable locking
3. Two-hole design matches thrust plate bolt holes precisely for easy installation
4. Low-cost small part, replace together in overhaul to avoid loosening failure

FAQ 

Q1:Can intact 8S-1491 lock plate be reused after disassembly?
A:Not recommended. Bending area has stress and will fail quickly on second use.

Q2:What failure will happen if lock plate loses function?
A:Thrust plate bolt loose, thrust plate shift, camshaft axial movement and timing drift.

Q3:Is this lock plate the same as thrust washer?
A:No. Thrust washer bears axial load; lock plate only locks thrust plate bolts.

Q4:Should I replace this lock plate together with new thrust plate?
A:Yes, it is disposable locking component.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us