Bucket 310714428 for XCMG XE215DA and XE230C excavator spare parts

Bucket 310714428 for XCMG XE215DA and XE230C excavator spare parts Featured Image
  • Bucket 310714428 for XCMG XE215DA and XE230C excavator spare parts

Short Description:

Bucket 310714428 with part number XUGB230BJLKA00020 is an original heavy‑duty digging bucket assembly for XCMG XE215DA and XE230C excavators. It has high structural strength and good impact resistance, suitable for spare‑part maintenance and replacement under heavy‑load conditions such as mine earthwork and stone loading‑unloading.

Product Detail

Product Tags

description

Bucket 310714428 is original complete bucket assembly matched for XCMG XE215DA and XE230C excavators. It is integrally welded with thickened high‑strength wear‑resistant alloy steel plates, with reinforced treatment on key stress‑bearing areas including lug seats, bucket bottom plate and side plates. The complete assembly is equipped with bucket teeth, tooth holders and side guard plates. Manufactured strictly according to original drawing standards, its lug spacing and pin‑hole dimensions match host dipper arm and connecting rod for convenient disassembly and replacement. Widely used in earth‑rock stripping, stone handling and heavy‑duty excavation on construction sites, it is an important wearing assembly for excavator heavy‑load operation.

product parameters

  • Part No.: 310714428
  • Matching Model: XUGB230BJLKA00020
  • Applicable Model: XCMG XE215DA, XE230C Excavator
  • Assembly Weight: 972kg
  • Front Lug Spacing: 320mm
  • Rear Lug Spacing: 307mm
  • Front‑left Bore Diameter: 80mm
  • Other Bore Diameter: 80mm
  • Lug Hole Center Distance: 476mm
  • Reference Bucket Capacity: 2.2m³
  • Applicable Materials: Earth‑rock, ore, weathered rock, broken‑stone muck
  • Welding Technology: Multi‑axis full‑automatic robotic welding
  • Material: Thickened high‑strength wear‑resistant alloy steel
  • Supply Scope: Complete bucket assembly, including bucket teeth, tooth holders and side guard plates
  • Structure Type: Heavy‑duty digging bucket
Bucket body 310504111 for XCMG XE135D excavator spare parts

advantage

• Original‑standard interface dimensions, front‑rear lug spacing, differentiated pin‑hole specifications and hole distance match applicable models. No secondary cutting or reaming required for direct replacement installation.

• Thickened wear‑resistant alloy steel plates endow bucket with strong anti‑impact and anti‑extrusion performance, lowering risks of bucket deformation and side‑plate tearing under heavy‑load conditions.

• Multi‑axis full‑automatic robotic welding ensures sufficient penetration for key stress‑bearing welds with full and uniform beads for high structural reliability in long‑term heavy‑load work.

• Local reinforcement on lug seats optimizes stress distribution of pin holes, reduces eccentric wear of pin holes and mitigates impact noise caused by excessive pin‑bushing clearance.

• Optimized inner bucket‑cavity structure guarantees smooth material flow, reduces material adhesion inside bucket and improves overall digging and loading efficiency.

FAQ

Q: Can bucket 310714428 be directly installed on XE215DA and XE230C excavators?

A: This bucket is compatible with both models. Install matched pins and bushings, and make sure assembly is in place before construction operation.

Q: Is this heavy‑duty bucket suitable for continuous high‑intensity hard‑raw‑rock mining?

A: It applies to earth‑rock, medium‑hard ore and weathered rock. Special reinforced rock bucket is recommended for long‑term high‑intensity hard raw rock operation.

Q: What are key points for daily maintenance of heavy‑duty bucket?

A: Inspect weld condition comprehensively on a regular basis and repair cracks timely. Replace bucket teeth once over‑worn. Grease pins and bushings periodically to prevent abnormal pin‑hole wear.

warehouse

We have built four spare parts warehouses in Xuzhou, Jining, Kunshan and Changsha to provide customers from all over the world with a variety of high-quality spare parts. We can basically ship self-provided spare parts within three days after confirming the order. If the spare parts need to be adjusted or processed, they will be shipped within 7-30 days.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories