Cylinder assembly for XCMG RP705 paver spare parts

Short Description:

Type 1 prevailing torque thin nut with non-metallic insert, fine thread M36×3. It is a lock-type hex thin nut with nylon insert, which provides prevailing torque locking by clamping thread.

Product Detail

Product Tags

description

This cylinder barrel assembly is made of 27SiMn seamless steel tube. The inner bore is precision honed with high accuracy on roughness, roundness and straightness, compatible with standard seal sets for stable pressure resistance. The barrel ends adopt welded or threaded connection with weld inspection, featuring excellent fatigue resistance and burst strength. It withstands alternating oil pressure and impact load, and is a core replacement part for paver tension cylinder, hopper cylinder and leveling cylinder, used when barrel damage or internal leakage occurs.

product parameters

Product Name:Cylinder Barrel Assembly
Material:27SiMn seamless steel tube
Inner Bore Process:Precision honing
Surface Treatment:Outer wall paint anti-rust
Pressure Rating:Matched with construction machinery hydraulic rated pressure
Matching Parts:Piston, guide sleeve, seal kit
Applicable Model:XCMG RP705 medium crawler paver

Applicable Scenarios

Suitable for paver tension cylinder, hopper cylinder, screed lifting cylinder and other hydraulic actuators, serving as pressure chamber to bear hydraulic pressure and drive loads.

advantage

▪ High-strength 27SiMn steel, pressure and impact resistant, not easy to crack
▪ High honed inner surface, less seal wear and lower internal leakage risk
▪ Weld inspection ensures reliability under alternating hydraulic pressure
▪ Outer paint anti-corrosion, suitable for humid and dusty construction site
▪ Standard original dimension, direct fit with piston and seals, good interchangeability

FAQ

Q:Can scratched cylinder bore be repaired?
A:Light scratches can be re-honed. Replace the whole assembly if deep scratch, crack or deformation exists.

Q:Does internal leakage always mean damaged barrel?
A:Not necessarily. Check seals first. Replace barrel if leakage remains after seal replacement.

Q:How to store cylinder barrel?
A:Seal both ends for dust prevention, keep inner bore clean and rust-free, avoid scratches on honed surface.

Q:Can I replace only the barrel instead of the whole cylinder?
A:Yes, if only barrel bore is damaged and other parts are intact, it saves maintenance cost.

Q:What is the risk of rust spots on honed surface?
A:Rust spots will continuously scrape seals and cause leakage. Heavily rusted barrel should be scrapped.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us