guide wheel for XCMG RP705 paver spare parts

Short Description:

Shaft is the core transmission part of paver travel drive system, used for torque transmission and supporting sprockets and bearings to deliver stable power. Compatible with XCMG RP705 medium crawler paver.

Product Detail

Product Tags

description

The idler wheel body is forged from alloy steel, the rim surface is induction hardened. It is equipped with built-in seal assembly and bearing structure for smooth rotation and reliable sealing. It bears impact and extrusion load from crawler during operation, guides the circulating movement of crawler stably, and cooperates with tension cylinder to adjust track tension, avoiding track deviation, jumping tooth and derailment. It adapts to bumpy working conditions on complex construction roads and is an essential spare part for crawler chassis maintenance.

product parameters

Type:Idler wheel
Material:Alloy steel
Processing:Forging + induction hardening
Seal Structure:Floating oil seal
Matching Structure:Tension assembly
Surface Hardness:HRC 52~58
Applicable Model:XCMG RP705 medium crawler paver

Applicable Scenarios

Suitable for the front of paver crawler chassis to guide track movement, adjust track tension together with tension device and prevent track deviation and derailment.

advantage

▪ Hardened rim for excellent wear and impact resistance, longer service life
▪ Floating oil seal design, dustproof and waterproof, keep sand out of bearing
▪ Low rotation resistance, reduce extra crawler wear and power loss
▪ Standard original dimension, perfect match with tension assembly and crawler
▪ Stable load bearing, lower risk of track deviation and derailment

FAQ

Q:What symptoms will be caused by heavily worn idler wheel?
A:Track deviation, abnormal noise, frequent derailment and vibration during travel, and even walking failure in severe cases.

Q:How does the idler wheel work with tension cylinder?
A:The tension cylinder pushes the idler forward and backward to change the track center distance and adjust track tension. Too tight or too loose is not allowed.

Q:What causes oil leakage of idler wheel?
A:Aging floating oil seal, scratched sealing surface, damaged bearing or improper assembly clearance will lead to oil leakage and sand ingress.

Q:Can the idler wheel be replaced separately?
A:Yes, it can be replaced separately. It is recommended to inspect crawler, tension spring and track roller at the same time to avoid uneven wear.

Q:Why does the idler wheel stop rotating?
A:It may be stuck by sand, bearing seizure, lubrication failure or damaged seal. Disassembly inspection or replacement is required.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us