inner retaining ring for XCMG RP705 paver spare parts

inner retaining ring for XCMG RP705 paver spare parts Featured Image
  • inner retaining ring for XCMG RP705 paver spare parts

Short Description:

Tension Shaft, suitable for XCMG RP705 medium crawler paver. It is the core shaft part of the feeding chain tensioning mechanism.

Product Detail

Product Tags

description

This paver internal circlip is stamped from high-quality spring steel strip, quenched and tempered for stable elasticity and good toughness. Its opening size and cross-section thickness are manufactured strictly according to national standards and original drawings. After fitting into the bore groove, it expands outward and clamps tightly with lasting radial spring force. Under long-term alternating vibration of the paver, it locks bearings and bushings to stop bore movement and reduce uneven wear of oil seals and abnormal clearances. Black oxide anti-rust treatment protects it from mud, water and asphalt dust on construction sites. If the circlip fatigues, loosens, deforms or fractures, the bearing will shift axially easily, leading to seizure, abnormal noise or assembly failure. It is a supporting wearing part for overhaul of feeding transmission and support assemblies, and replacement is recommended during disassembly.

product parameters

- Name: Internal Circlip (Bore Circlip)
- Applicable Model: XCMG RP705 medium crawler paver
- Material: Spring steel
- Process: Stamping, quenching and tempering, black oxide anti-corrosion
- Mounting: Fitted into internal bore groove
- Function: Axial limit, anti-disengagement, locking bearings and bushings

Applicable Scenarios

Axial limit for bearing bores of driven wheel assemblies and tension shafts; fixing bearings and bushings of feeding mechanism; preventing liner shifting inside supports and brackets.

advantage

- Spring steel substrate delivers lasting elasticity and stable locking without permanent deformation
- Tight dimensional tolerance for close fit in grooves and low loosening risk
- Black oxide finish provides corrosion resistance for harsh construction conditions
- Compact profile, ideal for confined space inside bearing housings
- Standard fastener for easy installation and convenient bulk stocking for overhaul

FAQ

Q: Can a slightly deformed circlip be reinstalled?
A: Reuse is not recommended. Once deformed, its spring force declines and it may pop out under vibration, causing bearing displacement. This low-cost critical lock part shall be replaced during disassembly.

Q: Can internal and external circlips be interchanged?
A: No. Internal circlips expand outward for bores while external ones contract inward for shafts. Their grooves and force directions differ completely.

Q: Is special tool required for installation?
A: Bore circlip pliers are recommended to compress the opening smoothly. Hammering by hand tends to crack the ring and ruin its elasticity.

Q: What faults will occur if the internal circlip falls off?
A: Axial bearing movement, abnormal running noise and uneven oil seal wear and leakage. In severe cases, the bearing may slip out and jam the driven wheel or tension unit, triggering chain jumping.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories