O-ring 55X3.1 for XCMG RP705 paver spare parts

Short Description:

Piston is the core power conversion component of paver hydraulic cylinder. It is installed inside the cylinder barrel, separates two oil chambers, converts hydraulic pressure into mechanical thrust and drives the piston rod to extend and retract.

Product Detail

Product Tags

description

This O-ring is sized 55×3.1, usually made of NBR nitrile rubber, with good hydraulic oil resistance and stable compression rebound. It is widely used for static sealing on cylinder end caps, fittings, valve blocks and oil ports. Simple and easy to install. It can be used with back-up ring under high pressure to avoid extrusion damage. It is a common sealing spare part for paver hydraulic maintenance.

product parameters

Product Name:O-ring 55×3.1
Dimension:55×3.1
Material:NBR Nitrile Rubber
Sealing Type:Static seal (low-pressure dynamic seal available)
Working Medium:Hydraulic oil
Applicable Model:XCMG RP705 medium crawler paver

Applicable Scenarios

Suitable for static sealing of paver cylinder end caps, hydraulic fittings, valve blocks and port plugs, sealing mating surfaces to prevent hydraulic oil leakage.

advantage

▪ NBR rubber, good oil resistance and stable elastic rebound
▪ Standard dimension, fits matching seal groove and easy installation
▪ Compact structure, versatile and cost-effective for maintenance stock
▪ Can be used with back-up ring for higher pressure resistance
▪ Uniform compression, reliable for radial and face static sealing

FAQ

Q:Can O-ring be used for reciprocating dynamic seal?
A:Not recommended for long-term dynamic service. U-cup is preferred.

Q:Lubrication needed during installation?
A:Lubricate with clean hydraulic oil, do not use sharp tools to avoid cutting.

Q:What causes hardening and cracking of O-ring?
A:Rubber aging, high temperature or deteriorated oil. Replace it directly.

Q:Is O-ring enough alone for high pressure?
A:Back-up ring is recommended for high pressure to prevent extrusion damage.

Q:What does 55×3.1 mean?
A:55 is inner diameter, 3.1 is cross-section diameter.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us