08C6172 Headlight wiring harness Liugong CLGB320C bulldozer spare parts

Short Description:

08C6172 Headlight wiring harness is special wiring component for lighting system of Liugong CLGB320C bulldozer. It integrates sheath, wires, connectors and protective sleeves. It transmits power signal and supplies electricity for headlights to guarantee normal lighting. Complete assembly replacement shall be carried out in case of sheath damage, circuit open‑circuit or connector ablation & oxidation.

Send email to us

Product Detail

Product Tags

description

Part number:08C6172
Part name: Headlight wiring harness
Unit name: 46C8438 Front-end circuit
Applicable Models: Liugong CLGB320C crawler bulldozer

Compatible with Liugong Bulldozer CLGB320C. Suitable for mine night‑shift bulldozing, earthwork night construction, quarry low‑light operation and open‑air site rainy‑humid conditions. For maintenance replacement when headlight fails to light, light works intermittently, connector burns out or harness sheath ages and cracks. Fit for original spare‑part replacement, overseas project maintenance in Middle East and Southeast Asia, electrical‑system overhaul of used bulldozers.

ITEM/PART NO./PART NAME

1 83A0112 GROMMET
2 06B0670 WASHER 1 8-300HV-DK (CHANGED FROM 06B0005)
3 00B0727 BOLT 2 M8×20-10.9-DK
4 38B0304 HORN N
5 CABLE TIE (INTERCHANGEABLE WITH 37B0119)
6 08C6172 HARNESS

=======================================

advantages

Disconnect main power supply before harness disassembly to avoid short‑circuit and burnout of lamps and electrical components
Mark corresponding position of each connector during old harness removal to prevent abnormal lighting caused by wrong connection of new harness
Route harness away from high‑temperature exhaust pipe and sharp sheet‑metal edge, prevent wire baking under high temperature or sheath cutting
Conduct power‑on test for high‑beam and low‑beam function after all connections are finished. Confirm normal lighting before putting machine into service.

FAQ

Q: Is full headlight‑harness replacement mandatory if headlight does not light?
A: Check bulb, fuse and connector pins firstly. Replace harness assembly only after confirming internal open‑circuit with intact bulb and fuse.
Q: Can locally‑damaged harness sheath be wrapped with adhesive tape for continuous usage?
A: Only acceptable for short‑term emergency. Tape tends to fall off under vibrating and humid site environment. Replace complete harness as soon as possible to eliminate short‑circuit risk.

warehouse

We have built four spare parts warehouses in Xuzhou, Jining, Kunshan and Changsha to provide customers from all over the world with a variety of high-quality spare parts. We can basically ship self-provided spare parts within three days after confirming the order. If the spare parts need to be adjusted or processed, they will be shipped within 7-30 days.