160-6310 arched bearing cap CAT spare part

Short Description:

510-0116 CAT suspension cylinder bearing cap, compression end cover for the bearing of mining truck suspension cylinder. It limits and fixes the articulated bearing of the cylinder, blocks sand and debris from entering the bearing mating area, and bears continuous impact load from suspension system.


Product Detail

Product Tags

description

This CAT bearing cap is made of high-quality carbon steel with arched structure and four mounting holes of 26 mm diameter. The mating surface is precision machined. It is mainly installed on the hinge joints of dozer arm and track roller frame. It clamps the articulated bearing, controls axial clearance, blocks sand and mud from entering the bearing fit area and disperses impact load at hinge points to ensure smooth rotation. It is overhaul replacement part for travel and arm hinge of CAT D8R and other machines.

Part number: 160-6310
Brand: CAT
Type: arched bearing cap
Minimum inner diameter: 101.75 mm
Material: Inner diameter (mm): 103.0
Total length (mm): 181.0
Total width (mm): 72.0
Material: Carbon Steel
Processing: precision machining, stress relief, anti-rust surface treatment
Matching parts: articulated bearing, bushing, seal, bolt, washer

Advantages:

1. High-strength carbon steel base, arched structure for uniform stress distribution, resistant to cracking and deformation under heavy impact of dozing and traveling
2. Precisely machined contact surface provides even compression and accurately controls bearing axial play to reduce shaking
3. Protective structure blocks mud and gravel, reduces wear of bearing and bushing and extends service life of hinge assembly
4. OEM hole layout, direct replacement, high compatibility with bearings, frame and cylinder hinge seats

FAQ 

Q: What faults will be caused by damaged bearing cap?
A: Axial play of hinge bearing, excessive hinge clearance and abnormal working noise. Sand intrusion accelerates bearing wear, and the arm movement may jam in severe cases.

Q: Can this bearing cap be purchased separately?
A: It is an individual spare part available for separate purchase and replacement.

Q: Is it recommended to replace seals together?
A: Replacement is recommended. Worn seals allow sand and mud to enter the bearing mating surface quickly.

Q: Where does failure usually occur?
A: Compression mating surface, stress area of bolt holes and arched bending stress zone.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us