175-7897 rubber seal ring for CAT bulldozer spare part

Short Description:

O-ring rubber seal for Caterpillar bulldozer, wheel loader and mining machine hydraulic and fuel circuit joints, static seal, prevents hydraulic oil and fuel leakage and blocks contaminants.

Product Detail

Product Tags

description

O-ring rubber seal is static sealing part for hydraulic, fuel and lubrication flanges, connectors and valve blocks. It seals the gap by compression deformation to retain fluid and block dirt and muddy water. Aging, cracking, extrusion damage and permanent compression set will lead to leakage, unstable pressure and hydraulic system contamination.

Part No.:175-7897
Type: O-ring rubber seal
Material: NBR nitrile rubber
Structure: Round O-ring
Sealing Type: Static sealing
Sealing Medium: Hydraulic oil, diesel fuel, lubricating oil
Working Condition: Medium pressure, normal temperature circuit joint
Matching System: Hydraulic system, fuel circuit, pump and valve assembly

Application Scenarios

Fits Caterpillar D8L/D9L/D9N/D9R track-type tractor, 966F/980F wheel loader, 785 series off-highway truck, widely used on hydraulic valve, pipe connector, pump and fuel circuit.

FAQ 

Q:Can I keep using the O-ring if it seeps slightly?
A:Not recommended. The rubber has lost compression, leakage will get worse and dirt may enter the hydraulic system.

Q:Can I reuse the intact O-ring after removal?
A:No. Permanent compression deformation occurs, re-installation leads to poor sealing.

Q:Can ordinary grease be used for lubrication during assembly?
A:Use compatible grease only. Incompatible grease will cause rubber swelling and premature failure.

Q:What causes O-ring extrusion damage?
A:Overpressure, excessive clearance, lack of groove chamfer and twisting during assembly are common causes.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us