195-30-62400 bogie pin assembly For Komatsu D375 bulldozer

Short Description:

708-7R-00612 is compact hydraulic cooling fan motor engineered for Komatsu D41E-6 small-medium crawler bulldozer.

Product Detail

Product Tags

description

Komatsu 195-30-62400 bogie pin assembly is critical undercarriage hinge part for heavy mining dozer. It connects bogie frame and roller arm, controls swing movement and transfers track impact load on rough mining ground. It fits Komatsu D375A-5 bulldozer, widely used in open pit mine and quarry. The pin is alloy steel quenched and tempered with hardened surface for wear resistance. Matched with bushing and seal set to block sand and mud. Replace assembly when pin scored, worn loose or seal failed, to prevent bogie bore damage.

Product Name: Bogie Pin Assembly
Part Number: 195-30-62400
Material: Alloy structural steel
Process: Quenched and tempered, surface high frequency hardening
Accessories: Retainer ring sold separately

advantages

1. Hardened alloy steel surface, good wear resistance against mine grit
2. High bending and extrusion strength for heavy impact of D375 dozer
3. Precision outer diameter, stable clearance with bushing to reduce rattle
4. Integrated seal design to keep mud and rock debris out
5. Standard OEM dimension, press-fit for direct replacement
6. High-demand undercarriage spare part for mining dozer, stable supply

maintenance & replacement tips

1. Mark alignment before removal, avoid forced hammering on frame bore
2. Use hydraulic press for installation, heavy hammer strike on pin end is forbidden
3. Clean mud and burr inside bore, check for oval wear
4. Install seal correctly, fill grease after assembly to maintain lubrication
5. Test run after replacement, check abnormal noise and re-grease regularly

FAQ

Q: Does this assembly include retainer ring?
A: No, retainer ring is sold separately.

Q: Can slightly worn pin be polished and reused?
A: Not recommended. Excessive clearance will damage bushing and frame bore rapidly.

Q: Why mud enters the joint soon after installation?
A: Broken seal, deformed bore or insufficient grease supply.

Q: Is pin replacement enough if the bore is worn oval?
A: Not effective. Bore bushing repair is required, otherwise new pin wears fast.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us