195-40-00800 195-40-00801 steering control valve assembly for Komatsu D375 bulldozer

Short Description:

This is left 195-30-51481 and right 195-30-51491 track adjuster cylinder for Komatsu D375A-5/D375A-6 bulldozer, adjusts track tension and works with recoil spring to absorb impact, replace the corresponding side if leaking, scored or losing pressure.

Product Detail

Product Tags

description

Komatsu 195-40-00800 and 195-40-00801 steering valve are core hydraulic control units for D375A-3 series mining dozer. It receives pilot signal from steering lever, distributes hydraulic pressure to control steering clutch and brake for turning function. It fits Komatsu D375A-3, D375A-3A, D375A-3D bulldozer for open pit mining. Cast steel valve body with precisely honed spool bore, built-in relief and check valves. 195-40-00801 is upgraded revision of 195-40-00800 with optimized orifice and internal circuit for smoother steering. They are not interchangeable without part book confirmation. Replace assembly when slow response, one side no turn, oil leakage or unstable clutch pressure, to prevent clutch disc burnout.

Product Name: Steering Control Valve Assembly
Part Number: 195-40-00800 (Original), 195-40-00801 (Updated)
Material: Cast Steel
Process: Precision casting, bore honing, hardened spool
Accessories: Steering clutch disc, brake disc and seal kit sold separately

advantages

1. Integrated spool assembly, synchronized clutch and brake control
2. Built-in pressure relief valve to protect clutch discs from overpressure
3. 195-40-00801 improved orifice design to reduce steering shock
4. Stable internal circuit, heat resistant for continuous mining duty
5. Standard port layout, direct replacement and simple commissioning
6. Hard-to-source hydraulic spare part for old D375A-3, popular for overseas overhaul

maintenance & replacement tips

1. Release hydraulic pressure before disassembly to avoid high-pressure oil spray
2. Verify part number strictly, internal circuit differs between two versions
3. Clean pipes and replace filter to prevent contamination damage
4. Adjust steering pressure to factory specification after installation
5. If steering remains weak, inspect steering pump and clutch piston seals

FAQ

Q: Can the two part numbers be interchanged directly?
A: Not recommended. 195-40-00801 has revised internal orifice circuit, check part book first.

Q: Can I just replace seal kit for leaking valve?
A: If spool or bore is scored, new seals fail quickly, full assembly replacement is better.

Q: What causes one side steering failure?
A: Stuck spool, internal leakage, insufficient pump flow or failed clutch piston seal.

Q: Does this valve include steering clutch discs?
A: No, clutch discs, brake discs and seals are sold separately.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us