195-40-00900 195-40-00901 steering valve assembly for Komatsu D375 bulldozer

Short Description:

This is Komatsu steering control valve assembly for D375A-3 bulldozer, 195-40-00800 base version and 195-40-00801 upgraded version, controls steering clutch and brake, replace if stuck, leaking or pressure loss.

Product Detail

Product Tags

description

Komatsu 195-40-00900 and 195-40-00901 steering valve assembly is core hydraulic control unit for D375A-3 and D375A-5D dozer. It receives pilot signal from steering lever, distributes pressure oil to actuate steering clutch and brake for turning function. It fits Komatsu D375A-3, D375A-3A, D375A-3D, D375A-5D mining bulldozer for open pit work. Cast steel valve body with precisely honed bore, built-in relief and check valves. 195-40-00901 is upgraded revision of 195-40-00900 with revised internal orifice to reduce pressure surge. This valve is different from 195-40-00800 series, not interchangeable. Replace assembly for slow response, single side no turn, leakage or unstable pressure to protect clutch discs.

Product Name: Steering Control Valve Assembly
Part Number: 195-40-00900 (Original), 195-40-00901 (Upgraded)
Material: Cast Steel
Process: Precision casting, bore honing, hardened spool
Accessories: Steering clutch disc, brake disc and seal kit sold separately

Fit for Komatsu D375A-3, D375A-3A, D375A-3D, D375A-5D bulldozer; 195-40-00900 original, 195-40-00901 upgraded replacement

advantages

1. Synchronized clutch and brake control for stable steering operation
2. Built-in pressure relief valve to prevent overpressure damage to clutch discs
3. Improved orifice design on 195-40-00901, smoother pressure output
4. Heat resistant cast steel body for long continuous mining duty
5. Standard port layout, direct assembly replacement and simple commissioning
6. Essential spare part for old D375 mining dozer, steady overseas demand

maintenance & replacement tips

1. Release residual hydraulic pressure before disassembly to avoid oil spray
2. This 00900/00901 series cannot interchange with 195-40-00800 series steering valve
3. Clean pipelines and replace filter before installation, contamination damages spool
4. Adjust steering pressure to factory specification and balance both sides
5. If steering remains weak after replacement, check steering pump and clutch seals

FAQ

Q: Can 195-40-00900 and 195-40-00901 swap directly?
A: 195-40-00901 is upgraded replacement. Check part book before swap, not universal for all units.

Q: Can I only replace seal kit for leaking valve?
A: If spool or bore is scored, new seals fail quickly, full assembly replacement is recommended.

Q: What causes one side steering failure?
A: Stuck spool, internal leakage, insufficient pump flow or failed clutch piston seal.

Q: Does this valve include steering clutch discs?
A: No, clutch discs, brake discs and seals are sold separately.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us