195-50-42111 pivot shaft for Komatsu D375 bulldozer

Short Description:

This is Komatsu bogie pin assembly for D375A-5 dozer, hinge pin for bogie frame and track roller arm, bears heavy walking impact load, replacement for worn or scored pin.

Product Detail

Product Tags

description

Komatsu 195-50-42111 pivot shaft is the main hinge spindle of D375 mining dozer bogie. It connects main frame and bogie, allows the bogie to swing over uneven ground and distribute track load evenly. It fits Komatsu D375A-5 and D375A-6 bulldozer for open pit mining and quarry. It is forged from large-size alloy steel, quenched and tempered with hardened journal surface for bending and extrusion resistance. Matched with special seals and bushings to block grit. Replace it when journal worn, scored, bent or seal failed, to avoid costly frame bore damage.

Product Name: Bogie Main Pivot Shaft
Part Number: 195-50-42111
Material: Alloy structural steel
Process: Forging, quenching and tempering, journal high frequency hardening
Accessories: Bushing, seal and retainer ring sold separately

advantages

1. Heavy forged steel body with high bending strength for D375 heavy impact
2. Hardened journal surface, excellent wear resistance against mine grit
3. Precision ground journal, stable clearance with bushing to reduce rattle
4. Standard seal groove for original seal, prevent mud ingress
5. OEM interchangeable dimension, press-fit for direct replacement
6. Critical undercarriage spindle for mining dozer, stable overseas demand

maintenance & replacement tips

1. Mark alignment before disassembly, avoid hammering frame bore
2. Use hydraulic press for installation, hammer strike on journal is forbidden
3. Clean mud and burr inside bore, check oval wear
4. Install seal correctly, fill grease after assembly
5. Test run after replacement, check swing movement and re-grease regularly

FAQ

Q: Does this pivot shaft include seals and bushings?
A: No, seal, bushing and retainer ring are sold separately.

Q: Can slightly worn pivot shaft be polished and reused?
A: Not recommended. Excessive clearance will damage bushing and frame bore rapidly.

Q: What causes bogie stiff swing and noise?
A: Bent shaft, worn bushing, mud ingress or insufficient grease.

Q: Is shaft replacement enough if the frame bore is worn oval?
A: Not effective. Bore bushing repair is required, otherwise new shaft wears fast.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us