200120692 adjustment pad for XCMG RP705 paver spare parts

Short Description:

Guide Block, Part No.200634056, is a sliding wear-resistant guide part for XCMG RP705 medium crawler paver. It is installed on screed, pull rod and auger sliding assemblies to restrict movement path, avoid offset and jamming, and ensure smooth sliding.

Product Detail

Product Tags

description

This adjustment shim is made of precision cold-rolled steel plate with flat surface and tight thickness tolerance. During assembly and overhaul, shims of different thicknesses are combined to set clearance and reduce eccentric wear and jamming. Under long-term vibration, hot asphalt and grit erosion, the shim may be crushed, worn, rusted and warped. Excessive clearance leads to loose mechanism and unstable paving thickness, so re-matching or replacement is required.

product parameters

Part No.:200120692
Product Name:Adjustment Shim
Material:Cold rolled steel plate
Processing:Precision cutting and surface grinding
Working Condition:Alternating vibration impact, high temperature and asphalt dust
Function:Precisely adjust assembly gap, level mounting surface and distribute pressure

Applicable Scenarios

Used for gap adjustment of screed slideway, auger mechanism, guide block and hinge support on XCMG RP705 paver. Replace when crushed, warped, unevenly worn or heavily rusted.

advantage

▪ OEM precise thickness with tight tolerance for fine adjustment
▪ Flat surface and proper hardness, resistant to plastic deformation under pressure
▪ Can be used singly or stacked flexibly for different clearance requirements
▪ Suitable for multiple adjustment positions of the paver
▪ Separate wear part, replace individually to save cost

FAQ

Q:Is adjustment shim the same as shim plate?
A:No. Adjustment shims are for fine tiny clearance tuning; shim plates are mainly for heavy load leveling. Do not mix them.

Q:Can slightly rusted shims continue to be used?
A:Light surface rust with unchanged thickness and flatness is acceptable. Replace if pitted or warped.

Q:Where should the shim be installed?
A:Between two mating surfaces for even force distribution, not only under bolt head.

Q:Is periodic recheck required after gap setting?
A:Yes. Vibration may change the shim compression state. Recheck and readjust during maintenance.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us