200635112 Tie rod bracket for XCMG RP705 paver spare parts

Short Description:

Nut, Part No.805200160, Size M20, is a standard locking nut for XCMG RP705 medium crawler paver. It is used with M20 bolts and washers to fasten brackets, guards, auger housings and chassis components.

Product Detail

Product Tags

description

This pull rod bracket is fabricated from thick steel plate with precision machined mounting holes. During paving, the screed elevation and angle adjustment rely on pull rods to transmit force. The bracket acts as a fixed pivot to restrict rod movement and ensure smooth adjustment. Under long-term alternating load, high temperature and grit erosion, weld cracks, deformation, elongated holes and rust may occur. Damaged bracket causes pivot offset, unstable screed angle and poor pavement flatness, which requires timely replacement.

product parameters

Part No.:200635112
Product Name:Pull Rod Bracket
Material:Thick steel welded assembly
Processing:Cutting, welding and drilling
Working Condition:Alternating tension load, continuous vibration, high temperature and asphalt dust
Function:Support pull rod assembly, bear tension and maintain adjustment accuracy of screed or auger

Applicable Scenarios

Installed on XCMG RP705 paver for screed and auger pull rod support. Replace when deformed, weld cracked, mounting holes worn out or heavily rusted.

advantage

▪ OEM welded structure with matched holes for direct installation
▪ Thick steel plate for high tensile strength and impact resistance
▪ Optimized pivot position to avoid rod interference
▪ Guarantee screed angle and auger adjustment precision
▪ Easy to disassemble and replace to shorten downtime

FAQ

Q:Can a slightly deformed bracket keep working?
A:Minor deformation with intact weld and holes is acceptable for temporary use. Replace if it causes rod binding.

Q:Can I repair the bracket by welding?
A:Small cracks can be repaired professionally. Replace it if twisted or holes are elongated.

Q:How tight should the mounting bolts be?
A:Tighten to specified torque, use lock washers or thread locker for high-vibration positions.

Q:Are left and right pull rod brackets interchangeable?
A:Most are handed. Wrong installation will cause interference and insufficient adjustment stroke. Match by part number.

Q:How to maintain the bracket?
A:Clean asphalt deposits regularly, check welds and bolt tightness, and remove rust timely.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us