200635125 lifting screw for XCMG RP705 paver spare parts

Short Description:

This hex head bolt M16×35 with part number 805006289 is an original fastening part for XCMG RP705 medium tracked paver. It is used together with nuts and washers to lock and fix structural components.

Product Detail

Product Tags

description

This lifting screw is processed from high-strength alloy structural steel. Its thread adopts precision rolling process with regular tooth shape and smooth transmission without jamming. It is strengthened by quenching and tempering heat treatment with excellent tensile and bending resistance. The surface is treated for wear resistance and rust prevention to resist asphalt dust, sand abrasion and moisture corrosion. It is original matching specification, precisely matched with lifting supports and adjusting nuts. Rotate the screw to fine-tune the height of distributing mechanism, control material height and reduce material segregation. It is easy to disassemble and replace, ensuring uniform and stable paving material layer.

product parameters

Part No.:200635125
Product Name:Lifting Screw
Applicable Model:XCMG RP705 Medium Tracked Paver
Material:Alloy Structural Steel
Process:Quenching and tempering, thread rolling, wear-resistant & anti-rust treatment
Thread Type:Trapezoidal Transmission Thread
Surface Hardness:HRC 28-35
Matching Parts:Adjusting Nut, Support Bracket
Applicable Working Condition:Asphalt Paving, Dust Impact, Frequent Lifting Adjustment Environment

Applicable Scenarios

Installed on the auger distributing lifting mechanism of paver, used to adjust the height of distributing frame and control material gap for construction with different paving thickness.

advantage

- High-strength quenched and tempered base material, bending and impact resistant, not easy to deform after long-term adjustment
- Precision trapezoidal transmission thread, smooth lifting adjustment and stable self-locking positioning
- Wear-resistant and anti-rust surface layer, resisting asphalt dust abrasion and adapting to harsh site environment
- Original matching dimension, perfectly matched with supports and nuts, good interchangeability
- High adjustment accuracy, convenient to control distributing height, reduce material segregation and improve paving flatness

FAQ

Q: Can the lifting screw be used after thread wear?
A: It is not recommended. Worn thread will cause excessive adjustment clearance and self-locking failure, leading to unstable distributing height and poor paving quality. Replace it in time.

Q: What causes jamming during adjustment?
A: It is usually caused by asphalt, sand and gravel stuck in thread gaps or lack of lubrication. Clean debris and add grease. Replace the screw if the thread is scratched or deformed.

Q: Does the screw need regular lubrication?
A: Yes. Check and apply grease before daily operation to reduce dry friction and extend service life.

Q: Can this screw be used on other paver models?
A: This screw is specially designed for RP705 paver. The thread specification, total length and installation size are customized. Do not use it on other models.

Q: Is locking required after height adjustment?
A: Lock the matching adjusting nut after reaching target height to prevent height offset caused by working vibration and keep stable material level.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us