201600902 pressure plate for XCMG RP705 paver spare parts

201600902 pressure plate for XCMG RP705 paver spare parts Featured Image
  • 201600902 pressure plate for XCMG RP705 paver spare parts

Short Description:

Press Plate, Part No.: 201600902, fits RP705 medium crawler paver. It is a dedicated clamping fixed plate for transmission hinge positions.

Product Detail

Product Tags

description

This press plate is laser cut from high-strength carbon steel and leveled for excellent rigidity against distortion. Precisely positioned mounting holes guarantee consistent alignment. Rounded edges avoid cutting rubber liners and bushings. After shot blasting, durable anti-corrosion paint is applied to resist hot asphalt, abrasive aggregate, muddy water and oil. When tightened, it delivers uniform clamping pressure without localized stress cracking. Under continuous machine vibration and material impact, it holds internal components securely, controls hinge clearance, reduces drive noise and uneven wear, extends service life of wear parts and keeps linkage movement stable.

product parameters

- Part Number: 201600902
- Name: Press Plate
- Applicable Model: RP705 medium crawler paver
- Material: High-strength carbon structural steel plate
- Process: Laser cutting, leveling, hole punching, edge rounding, sandblasting, anti-corrosion painting
- Matching Parts: Bushing, retainer shim, rubber strip, bolt, flat washer
- Function: Clamp wear parts and limit pieces, distribute fastening pressure, control hinge clearance, prevent loosening and curling

Applicable Scenarios

It is installed at feed drive hinges and swing linkage limit positions of RP705 paver for asphalt paving on municipal roads, highways, yards and airport runways.

advantage

- Thickened steel plate base material provides sufficient rigidity, making it less prone to bending and deformation under compression.
- Precise original hole spacing ensures easy assembly and alignment, eliminating the need for on-site trimming.
- Rounded corner protection design prevents cutting of rubber and bushings, reducing component wear.
- The anti-corrosion coating has strong adhesion and is suitable for dusty, humid, and oily environments on construction sites.
- The pressing surface is flat and the force is evenly distributed, preventing localized crushing after tightening.
- Standard dimensions, direct replacement of old parts, convenient for stocking and installation.

FAQ

Q: Can a slightly warped press plate stay in service?
A: Minor warping may be corrected for temporary use. Replace it if cracked or prone to spring back.

Q: Must a rusted press plate be replaced?
A: Light surface rust can be sanded and repainted. Replace if pitting reduces plate thickness and strength.

Q: Can custom-cut steel plate substitute this press plate?
A: Not recommended. Homemade plates rarely meet flatness, hole spacing and edge requirements.

Q: Why does the bushing still rattle after installation?
A: It is usually caused by distorted plate or uneven bolt torque. Tighten diagonally or replace the plate.

Q: What faults occur if the press plate fails?
A: Unrestrained bushings and shims create excessive play and noise, accelerating wear and risking jamming.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories