200635128 Screw for XCMG RP705 paver spare parts

Short Description:

This hex nut M16 with part number 805201500 is an original standard fastener for XCMG RP705 medium tracked paver. It is used with M16 bolts and washers for locking and fixing through thread engagement.

Product Detail

Product Tags

description

This screw is forged from high-strength alloy structural steel. Its thread adopts precision rolling forming process with full and regular tooth shape, smooth transmission and good self-locking performance. It is strengthened by quenching and tempering heat treatment with excellent tensile, bending and fatigue resistance. The surface is treated for wear resistance and rust prevention to resist abrasion by asphalt dust and sand and moisture corrosion on site. It is original matching size, precisely matched with corresponding nuts and support seats. Rotate the screw to fine-tune the distributing mechanism. It is easy to disassemble and replace, ensuring uniform paving layer and reducing material segregation.

product parameters

Part No.:200635128
Product Name:Screw
Applicable Model:XCMG RP705 Medium Tracked Paver
Material:Alloy Structural Steel
Process:Quenching and tempering, thread rolling, wear-resistant & anti-rust treatment
Thread Type:Transmission Thread
Surface Hardness:HRC 28-35
Matching Parts:Adjusting Nut, Support Bracket
Applicable Working Condition:Asphalt Paving, Dust Impact, Frequent Adjustment Environment

Applicable Scenarios

Installed on the auger distributing adjustment mechanism of paver, used to adjust the height and gap of distributing frame for construction with different paving thickness and control material distribution.

advantage

- High-strength quenched and tempered base material, bending and fatigue resistant, not easy to deform after repeated adjustment
- Precisely rolled transmission thread, smooth adjustment and stable self-locking, no position drift
- Wear-resistant and anti-rust surface layer, resisting asphalt adhesion and sand abrasion for harsh site environment
- Original matching specification, perfectly matched with nuts and supports, good interchangeability
- Stable adjustment accuracy, helpful to control distributing status and improve paving flatness

FAQ

Q: Can the screw be used after thread wear?
A: It is not recommended. Worn thread will cause excessive adjustment clearance and self-locking failure, leading to unstable distributing height and poor paving quality. Replace it in time.

Q: What causes jamming during screw adjustment?
A: It is usually caused by asphalt, sand stuck in thread gaps or lack of lubrication. Clean debris and add grease. Replace the screw if the thread is scratched or deformed.

Q: Does the screw need regular lubrication?
A: Yes. Check and apply grease before daily operation to reduce dry friction and extend service life.

Q: Why lock the nut after adjustment?
A: Paving operation brings heavy vibration. Locking nut fixes the position and prevents the screw from rotating automatically to keep stable material level.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us